ausmini • View topic - adjusting rockers

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

adjusting rockers

Moderators: winabbey, simon k, poeee, Mick

Page 2 of 2

[ 26 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Mini Mad

Post subject:

Posted: Thu May 12, 2005 11:52 am

ET 13.457 seconds , OH YEAH !!!!

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney

drmini in aust wrote:

Mini Mad wrote:

I seen it done both ways, the doc does it the second way described as well...

Reminds me i need to have a go at mine...

I don't do it that way ...
What I do is "modified rule of 9"
Say you turn the engine until valve #1 is on full lift, you can then adjust #8. But you will notice that an inlet valve is within a couple of degrees of full lift too. I turn the motor a few degrees more until it is just about full lift, then adjust its mate (rule of 9) at the same time as I do #8. This way I only have to move the motor 4 times, and I'm done. :wink:

oops..

well it was close :lol:

...i knew it was different to the standard rule of 9 when you did it in half the time :wink:

...i'm still confused though

_________________

Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484

Top

gafmo

Post subject:

Posted: Thu May 12, 2005 6:15 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Funny how this thread has just come up now...Morris blew a head gasket today...so I may try the 1-2-3 Skip method this time :wink:

For those interested...between 1 & 2 and no it was not an ACl Gasket

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

13secmini

Post subject:

Posted: Thu May 12, 2005 7:21 pm

1275cc

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong

hey gaf what gasket did u have in there? wonder why its always between 1 and 2...

acl have a 3 year/ 100,000km warrenty on them,, i think i will be using that in the future

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs

Top

gafmo

Post subject:

Posted: Thu May 12, 2005 10:17 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

I'm glad you asked...the the one time I will not recomend a Karcraft product is thier head gasket for a 998/1100 Silver head gasket...Prior t this we Did Blow one 3-4 :shock:

so its not just between 1 &2 :!:

I + other believ the it's just not good enought :!:

I will be replacing it with a ACL Head gasket which I believe will lasty considerable longer..the story will or will not...be told...Hayt Kazjim...how is my Old ACl going...Consideriang...you have turbo 998 and was notorias blowing Head gaskets :?:

Have we heared of one lateley....Nope...Karcraft... :idea:

am I making a Point :!:

Yer the Gemini and Cancer comes out in me some times :!:

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

drmini in aust

Post subject:

Posted: Thu May 12, 2005 10:25 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW

@ gafmo...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

gafmo

Post subject:

Posted: Thu May 12, 2005 10:42 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Sod

Its jus one of those things in life

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

Mike

Post subject:

Posted: Fri May 13, 2005 5:43 pm

1098cc

Joined: Tue Mar 16, 2004 10:39 pm
Posts: 1629
Location: Sydney, E. Burbs

Damn man - I've never heard you complaining about anything before - me though I bitch all the time. I even bitch about me bitching.

But luckily have been using BK450s (1275head) as per Kev's advice and no problems, so no reason to complain but then I could bitch about the lack of an excuse to bitch?

Top

Mini Mad

Post subject:

Posted: Fri May 13, 2005 6:41 pm

ET 13.457 seconds , OH YEAH !!!!

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney

My ACL's been good so far..touch wood..Have we had one of these blow yet?

_________________

Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484

Top

gafmo

Post subject:

Posted: Sun May 15, 2005 11:41 am

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Okay I tried the 123 Skip to 5 method...Yer it does work for a starter....But you will have to adjust from thier with the 9 Method..

I tried and its not exact :wink:

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

simon k

Post subject:

Posted: Sun May 15, 2005 4:28 pm

Yay For Hay!

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border

gafmo wrote:

Okay I tried the 123 Skip to 5 method...Yer it does work for a starter....But you will have to adjust from thier with the 9 Method..

I tried and its not exact :wink:

you're doing it wrong boyo

_________________
did I tell you that I won a trophy?

Top

gafmo

Post subject:

Posted: Sun May 15, 2005 4:50 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Nar mate...thier is no way that 1,2,3 & 5 eg once ajusted to be correct
Sorry It close but you do need to re adjust with the 9 method
I did it as you have post :wink:

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

Page 2 of 2

[ 26 posts ]

Go to page Previous 1, 2

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: