i need a filter to go on the end i'm sucking dirt in the ram pipes and socks don't let any air in. Brand and where to buy/
thanks guys

The Ramflo filter will fit on the Dellorto but you may have to remove the mat on the firewall(if it aint already gone...)

I got mine from Autopro or Repco may have them.

Hooroo

_________________
Rob Forsyth
Miniot!!

Ramflo RF455 P5S is the one, the filter body is offset upwards.
Keep an eye on the foam, when it's had it I'd buy a Unifilter LNX400 pad for $8.90. And oil it with Unifilter oil.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

thanks guys where do i buy one such item?

Ramflo filters here-
http://www.lynxcorp.com.au/shopping/def ... &group=ALL
Note the RF445 `P5S' offset bases are hard to get, you may have to order one.

Unifilter foam pads here-
http://www.uniflow.com.au/
p/no is LNX400.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

thanks doc, i emailed them earlier as they were the only place i could find similiar products but they didn't write back, so i asked but its seems i may have to hassle them.
thanks again.

Will the LNX400 also suit a weber dcoe45?

_________________
Santo

"The Lone Ranger"
HI-HO Silver......AWAAAAAY!

this thread should be called "air filters for dellortos?" or something like that,
sorry to be a pain.

YES.
Weber DCOE and Dellorto DHLA carbs share common inlet and outlet flange sizes.
But internally, nothing is the same.... ie Weber parts only fit Weber.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

i said i am sorry to be a pain about it.
but it helps for people to use the search function, theres too many vague topic descriptions

if you're sorry, why did you post it
hahahaha you're just an easy target Ryan

do you actually need sock filters for your dellorto - are you sure the ramflo isn't one that sits flush against the mouth of the carb???

like these?

_________________
did I tell you that I won a trophy?

Personally I'm not a fan of ramflo foam filters. It's K&N all the way.. I'm not gonna risk my 15 grand engine to a marginal filter...

Filters only stop rocks from going in, you know this; right?......

ramflo's only filter rocks

im more concerned with dust, cos i can see how much the paper filters collect

GOOD foam filters better than paper. Ask Unifilter.
I agree with comments above re Lynx's Ramflo foam, but the Unifilter (or the old Finer Filter) foam is GOOD.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.