Ausmini
It is currently Sun Jun 22, 2025 4:37 am

Board index » Mini Chat » Mini Engine Conversions

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Print view Previous topic | Next topic 
Author Message
Mokesta
PostPosted: Tue Jan 24, 2006 1:33 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Nov 19, 2005 1:37 pm
Posts: 2495
Location: Vegus, Brisvegus
I've been reading the threads about 4efte conversions in round nose cars. It seems the biggest issue is cooling the things. I've got an idea that may be ok.

Richard Anderson of ARE Radiators in Brisbane www.are.com.au makes curved custom intercoolers and oil coolers. He could make an intercooler in the shape of the mini grille similar to the oil coolers in the picture below:

Image

Image

The rover grille shape with the thick surround would be suitable as the end tanks could be made to look like the grille surround.

It certainly wouldn't be cheap and not as stealthy as a standard grille but you wouldn't need to cut a scoop into the bonnet and could fit a water radiator behind so no need for it to go into the boot.

What do you think?

M
Top
 Profile  
 
awdmoke
 Post subject:
PostPosted: Tue Jan 24, 2006 3:11 pm 
Offline
1360cc
1360cc
User avatar

Joined: Thu Feb 03, 2005 1:41 pm
Posts: 12311
Location: Rockingham - Collie WA
Looks cool & expensive! 8)

_________________
Too many cars, and too little time.
Top
 Profile  
 
minstar
 Post subject:
PostPosted: Tue Jan 24, 2006 4:03 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Aug 18, 2004 2:41 pm
Posts: 1145
Location: ACT
Mokesta I toyed with this idea even in the clubby as you have the peaked front so I was going to have it basically bent in the middle to followed the angle at the front of the car. May still go down this route when the money I'm getting for my kidney comes through from Paypal. :lol:

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au
Image
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Tue Jan 24, 2006 5:03 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
this is a pic of matt reads cooler setup

Image

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
inazuma_x
 Post subject:
PostPosted: Tue Jan 24, 2006 5:21 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Oct 10, 2005 5:48 pm
Posts: 1200
Location: Brisbane, QLD
thats the thing though...the front of a roundnose (the grille area anyway) isnt really all that round :P so...having an uber expensive bendy radiator wouldnt really make a HUGE difference i wouldnt think...matt's solution is interesting...although i would have probably tried to fit a square one in the predominantly square hole that the grille fits over...

_________________
Bling me up Scotty!
"wait till it grows into a plant...then bunny rabbit THE PLANT!"

1966 Morris Mini DeLuxe FOR SALE
Top
 Profile  
 
fuzzy-hair-man
 Post subject:
PostPosted: Tue Jan 24, 2006 6:53 pm 
Offline
1098cc
1098cc

Joined: Wed Nov 24, 2004 10:23 am
Posts: 1488
Location: Armidale, NSW
inazuma_x wrote:
...matt's solution is interesting...although i would have probably tried to fit a square one in the predominantly square hole that the grille fits over...


They didn't make it the way he asked :x :wink:

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss
Top
 Profile  
 
inazuma_x
 Post subject:
PostPosted: Wed Jan 25, 2006 8:15 am 
Offline
1098cc
1098cc
User avatar

Joined: Mon Oct 10, 2005 5:48 pm
Posts: 1200
Location: Brisbane, QLD
ah...that explains it...

_________________
Bling me up Scotty!
"wait till it grows into a plant...then bunny rabbit THE PLANT!"

1966 Morris Mini DeLuxe FOR SALE
Top
 Profile  
 
minimetoy
 Post subject:
PostPosted: Wed Jan 25, 2006 2:17 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Jul 20, 2005 8:23 pm
Posts: 776
Location: Concord West, NSW
Yeah, I've being toying with the idea of putting it in the front where the grille fits, this is part of a pm i sent on the 31st December 2006 to inazuma.

Quote:
My most recent thought is to try and fit it in the front. When i complete the exhaust manifold i'll review, but I'm thinking of having a twin coer radiator made that will fit into the grille opening. The radiator tanks will be on the sides of the radiator not on the top and bottom and the 850 grille may even fix back onto the radiator???

I am unsure of thermo fans and room for them. I suppose once the manifold is made then i can make up a template and see how it all fits.


So ithink we are all trying to explore ideas on how to best fit the radiator withourt being seen.

Dan
Top
 Profile  
 
inazuma_x
 Post subject:
PostPosted: Wed Jan 25, 2006 2:33 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Oct 10, 2005 5:48 pm
Posts: 1200
Location: Brisbane, QLD
minimetoy wrote:
Yeah, I've being toying with the idea of putting it in the front where the grille fits, this is part of a pm i sent on the 31st December 2006 to inazuma.

Quote:
My most recent thought is to try and fit it in the front. When i complete the exhaust manifold i'll review, but I'm thinking of having a twin coer radiator made that will fit into the grille opening. The radiator tanks will be on the sides of the radiator not on the top and bottom and the 850 grille may even fix back onto the radiator???

I am unsure of thermo fans and room for them. I suppose once the manifold is made then i can make up a template and see how it all fits.


So ithink we are all trying to explore ideas on how to best fit the radiator withourt being seen.

Dan


yep...i am having the same thoughts these days too...i was actually wondering if you could do a split...so have the radiator and intercooler sitting right next to eachother sticking through the grille...just a thought...not sure about it yet :P

_________________
Bling me up Scotty!
"wait till it grows into a plant...then bunny rabbit THE PLANT!"

1966 Morris Mini DeLuxe FOR SALE
Top
 Profile  
 
Mokesta
 Post subject:
PostPosted: Wed Jan 25, 2006 7:45 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Nov 19, 2005 1:37 pm
Posts: 2495
Location: Vegus, Brisvegus
Richard is an artist and he can make just about anything. I wasn't really thinking about something as obvious and agricultural as Matt's, more like a grille-shaped intercooler than a panel-hole shaped one.

I hope one of you comes up with something that works well in Brisbane heat and doesn't involve a boot-mounted rad. That's all that is stopping me from doing a Striped and ditching the G13B for 4EFTE. I will be taking mine to the track and wouldn't want it to drop all its fluids like so many standard Jap turbos do when they do track days.

I have been following the roundy builds and at this time I just can't see the 4EFTE being able to lap consistantly without getting hot. Traffic light GP will be fine.

M
Top
 Profile  
 
marcsvenson
 Post subject:
PostPosted: Wed Jan 25, 2006 9:44 pm 
Offline
998cc
998cc

Joined: Sun Apr 03, 2005 3:10 pm
Posts: 891
Location: Brisbane, West Siiede
your doing a suzuki as well :?:
Top
 Profile  
 
Mokesta
 Post subject:
PostPosted: Wed Jan 25, 2006 10:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Nov 19, 2005 1:37 pm
Posts: 2495
Location: Vegus, Brisvegus
Well... I've got the shell, I've got the suzuki, taken the engine, wiring, dash etc out & thrown the rest away and I've paused.

Image
Top
 Profile  
 
JC
 Post subject:
PostPosted: Wed Jan 25, 2006 10:37 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Jun 03, 2004 2:56 pm
Posts: 3981
Location: Brisbane
Mokesta,

Where in Brisbvegas are you? I've seen those door trims before.....

JC

BTW- With regard to your radiator, go to your local bike wrecker. You'll be surprised with what you find...........at a mere fraction of the price.
Top
 Profile  
 
Mokesta
 Post subject:
PostPosted: Thu Jan 26, 2006 8:34 am 
Offline
1275cc
1275cc
User avatar

Joined: Sat Nov 19, 2005 1:37 pm
Posts: 2495
Location: Vegus, Brisvegus
My place is in Windsor (see Frappr) but I bought the car from a young bloke in Caboolture over a year ago. It had been running up to about March 03 I think. Poor kid never checked the oil.
M
Top
 Profile  
 
marcsvenson
 Post subject:
PostPosted: Thu Jan 26, 2006 10:42 am 
Offline
998cc
998cc

Joined: Sun Apr 03, 2005 3:10 pm
Posts: 891
Location: Brisbane, West Siiede
ahh mokesta you are exactly where im at have the engine and stuff and good shell but am waiting for frame
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Board index » Mini Chat » Mini Engine Conversions

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.