ausmini • View topic - Core Plug Sealer

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Core Plug Sealer

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Post subject: Core Plug Sealer

Posted: Thu Mar 04, 2021 12:35 pm

998cc

Joined: Sun Sep 11, 2005 12:41 pm
Posts: 907
Location: Bunbury WA

What is a good sealer for core plugs

_________________
1965 Morris 850
1966 Morris Mini Minor
1967 Morris Cooper 'S'
1977 Leyland LS

Top

drmini in aust

Post subject: Re: Core Plug Sealer

Posted: Thu Mar 04, 2021 1:39 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW

Stag is best. However I've used Loctite 515 or Permatex aviation gasket cement successfully.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Stibbsy

Post subject: Re: Core Plug Sealer

Posted: Thu Mar 04, 2021 2:03 pm

848cc

Joined: Sun Mar 16, 2014 11:01 am
Posts: 462
Location: TOWNSVILLE NQ

drmini in aust wrote:

Stag is best. However I've used Loctite 515 or Permatex aviation gasket cement successfully.

Doc, I was told stag is vey susceptible to the modern coolants we use these days. I have used loctite 515 with success.

Top

Post subject: Re: Core Plug Sealer

Posted: Thu Mar 04, 2021 4:02 pm

1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2582
Location: Brisbane

stag

_________________
The bitterness of poor quality (or Crappy Workmanship) remains LONG AFTER the Sweet Taste of Low Price is forgotten.

Top

Bill B

Post subject: Re: Core Plug Sealer

Posted: Fri Mar 05, 2021 4:05 pm

1275cc

Joined: Sat Feb 09, 2013 5:44 pm
Posts: 2236
Location: Camden

I used Stag on a leaking plug about 3 years ago and it's still holding OK, with corrosion inhibitor in coolant.

Top

Post subject: Re: Core Plug Sealer

Posted: Wed Mar 10, 2021 12:01 pm

998cc

Joined: Sun Sep 11, 2005 12:41 pm
Posts: 907
Location: Bunbury WA

Ok thanks for the info

_________________
1965 Morris 850
1966 Morris Mini Minor
1967 Morris Cooper 'S'
1977 Leyland LS

Top

Harley

Post subject: Re: Core Plug Sealer

Posted: Thu Mar 11, 2021 5:05 pm

1360cc

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne

I put Stag on the core plugs in an engine I did 10 years ago - still not leaking!
Everything else in the mini however....

Top

mickmini

Post subject: Re: Core Plug Sealer

Posted: Sat Mar 13, 2021 12:01 pm

1275cc

Joined: Mon Apr 26, 2004 6:31 pm
Posts: 4663
Location: Sydney - strangely, I am glad of the sight of hills!!

I used a dab of the mercury non hardening gasket sealer on mine about 14 years ago. No leaks!

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates ;-)

Top

Scoop

Post subject: Re: Core Plug Sealer

Posted: Sat Mar 20, 2021 8:08 am

998cc

Joined: Mon Mar 10, 2014 11:38 am
Posts: 1143
Location: Tassie

Aviation sealer or Wurth pipe seal. Never had any issues with either.

_________________
1963 Morris 850 Smoke Grey
1963 Morris 850 Shadow Blue
1965 Morris Mini Smooth Van
1966 Morris Mini Van
1969 Morris Mini Deluxe Resto
5/72 Clubman Gt

Top

Page 1 of 1

[ 9 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 70 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: