In Australia due to shipping,

what is the best/suitable camshaft lube to use in the A series mini engine
and where to buy?

can not see any listed on Any of the Australian mini business websites?

Karcraft sells mpz cam lube, around $16.50 a tube.
I just use Castrol LMM molygrease. It is less likely to drip off if engine is stored for any time.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

mix half/half of molly grease & STP, best Sticky Tacky Poop you can get
we`ve used it on lifters & cams since the noah designed the Arc

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

I used Nulon L90 with no problems in our motors

http://www.nulon.com.au/products/Specia ... ant/#intro

_________________
66 MK 1 Cooper S
64 Grp N Cooper S
64 Grp N Cooper S (ex Bob Asher)
64 GRP N Cooper S (ex Fred Burley)

What cam did Noah's ark use?
And does Minispares still sell them?


PS
Thoughts to you and family about your father. He will never go far away from you.
PPS Thanks for the formula too.
Bill

Hits like button

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.