Guys, I building a replica J car and I am trying to identify the shock in this picture, based on colour either Koni or Spax ??, looks like he has removed steel/rubber dust cover. any help would be appreciated, Mal

Is there anything stamped on them? Looks like a Spax, some of them had plastic shields (that fell off)

No chance of checking markings, car was destroyed in a crash in the 80s, and was subsequently stripped for parts. Unfortunately the guy that built it passed away a couple of years ago

https://www.youtube.com/watch?v=URB7NYu72bU

Are they adjustable? Most all Spax have an adjustment screw near the bottom eye, Konis don't.
On a Koni you remove from car, push the rod right in and rotate it to adjust the internal valving.
If they are Konis, they are sport ones. Std Konis are orange not yellow.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Spax Mal.
The adjustment screw is at the bottom.

I have a pair on the Goggo (might even be the same pair)

_________________
Too many cars, and too little time.

sweet we can discuss when you pick up the alto motor