Ausmini
It is currently Sun Jun 29, 2025 8:59 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Mar 20, 2005 9:20 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
I drove a really nice clubman yesterday that had 9inch brakes brake conversion. From memory they were suzuki brakes? not sure, but BOY they stopped hard. It has made me think alot about Lillee's brakes :lol:

So if you were me and this was the 2 situations, what would you do?

OK, Lillee has never had flares, I like the look of no flares and I'd like to keep it that way but I need disk brakes in the near future

Situation 1: I have 1 whole set of new bling bling LS contessas ready to go onto the car. These are offset so that they fit on my current offset drums (front and rear) so that all I need is front 7.5 inch S Discs and away we go. At least $1500 for S discs but no more to spend and I get to keep the no flares look.

Situation 2: I go out, buy 4 regular offest contessas ($200?), 4 flares ($150?), a new chrome edge strip (??) convert a set of Honda Brakes ($200?) and install them on Lillee. Total cost probably around $550-$700 but they will be very good at stopping and she will look wide and mean :lol:

EIther way the rear master cylinders will need to be changed to so they don't lock up first. Another $100?

Either way it will cost money, but which would you go? Bottom line, Flares or no Flares???

_________________
Lillee - 1969 Morris Mini K


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 10:20 am 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
In this case Flares then :!:

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 10:24 am 
Offline
1098cc
1098cc
User avatar

Joined: Sat Oct 16, 2004 10:59 pm
Posts: 1285
Location: the Cold Toast QLD
rear wheel cylinders (slaves) for disc fronts are quite reasonably priced... probably one of the few things that isnt an "exploit the miniowner" price. IMO

_________________
No longer Ms Westwoods mini outside her original kings road shop


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 12:33 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
Chong,
Just bung some Inno flares (like mine) on it- no body mods needed, and if you want to take them off later, just fill the tiny screw holes. :wink:

BTW they were Honda 9.1" discs, with a VH44 servo.. stop OK, don't they! :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 12:57 pm 
Offline
1275cc
1275cc

Joined: Mon Mar 22, 2004 7:41 pm
Posts: 4319
Location: Plumpton, NSW
Chong,

The Doc hasn't mentioned it so obviously I'm wrong, but I thought you would have needed S offset contessas to fit over 7.5" S brakes. No?

I realise S offset means flares though.

KB


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 1:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
1310/71 wrote:
Chong,

The Doc hasn't mentioned it so obviously I'm wrong, but I thought you would have needed S offset contessas to fit over 7.5" S brakes. No?

I realise S offset means flares though.

KB

So-called S offset Contessas will fit over S brakes with a bit of stuffing about. And no you don't need flares. Just the $$$ for the brakes.. :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 3:03 pm 
Offline
848cc
848cc

Joined: Tue Mar 16, 2004 6:39 pm
Posts: 383
Location: Gold Coast
I'd probably save for the 7.5 inchers. Less screwing around.

I've got honda 9.1's under 12" Chinalites. Stops pretty well.


dewey

_________________
dwightgunning.com


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 3:44 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
I do believe the LS contessas I have now, if I wack in 7.5 S brakes they fit without flares. I have stepped drums on all 4 right now with these contessas and no flares so...

One thing though Kev, if I go flares it will have to be like Barneys. Inno flares just won't do! it will make Lillee look like a Rover! (not that there's anything wrong with that... :lol: )

I would go the full monte and weld wheel arc bits just like Barney's ones, they are pristine!

One things is for sure, 10inch wheels all the way either way...

_________________
Lillee - 1969 Morris Mini K


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 3:47 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
drmini in aust wrote:
BTW they were Honda 9.1" discs, with a VH44 servo.. stop OK, don't they! :lol:


Bloody hell they did! :lol: :shock: on a dime!

But Kev, I can't use the LS contessas I have now if I go the honda brakes option right?? I think I've asked this before...

_________________
Lillee - 1969 Morris Mini K


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 6:55 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
No the LS Contessas are fine with discs, if they are Cooper 7" or Cooper S 7-1/2". Nothing else will fit in there.. too much inset! :lol:

If you wanna keep the looks without flares, get some S discs. Cheap ones are out there- I know a couple of people who scored some recently. :wink:

BTW Chong.. are you taking the piss out of Mini Ha Ha?? :shock: Same brightwork as yours.. I don't think it looks like a Rover- it doesn't have the right crappy grille! :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 20, 2005 7:43 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
WHat? Don't put words into my mouth. I just don't like black flares! :lol: In fact, I just don't like flares full stop!

You're car is awesome! what are you on about? I measure my car on yours! (and I think lots of other people do too!). If only Lillee was half as able as Ha ha :lol: Remeber when I came on Saturday I almost had a heart attack at the sight of Ha ha with no engine :lol:

Flares... i just don't know... :(

_________________
Lillee - 1969 Morris Mini K


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.