Ausmini
It is currently Thu Jun 26, 2025 3:52 am

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
minifreak1
PostPosted: Sat Feb 05, 2005 8:48 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Mar 18, 2004 6:34 pm
Posts: 722
Location: melbourne vic
hi people was just after some help regarding a custom cold air induction box to fit onto a webber 45dcoe???

Have been looking at getting on for some time now.
link automotive made one but the guy that makes them harnes i think he is called stopped making them as they were a tad hard to reproduce and some of them didnt fit quite well. theres was a good one from what i saw with all the proper induction porting insde the main chamber and it was made from alloy and had two entrences both around the 2 inch wide area.

dose anyone out there have one off theses???
if so do you think it makes a diffeence???
and dose anyone out there in mini land know of anyone who sells a kit that fits onto a webber and onto a mini?????

any help would be great.

thanks...from minifreak1

email ... [email protected]
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sat Feb 05, 2005 10:49 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
I did make one, (not quite finished as shown) it just fits on a DCOE or DHLA carb (using Redline 3005 manifold) without cutting the firewall. There is 10mm clearance. :shock:
Sold to Mini Mad (along with the 40DHLA carb) but he's not picked it up yet. :lol:
Intake horn is 70mm dia. Filter shown was to get it running, then bend some tube up and try different ram lengths. Yeah- probably a waste of time, I know. :lol:
Image

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
TK
 Post subject:
PostPosted: Sun Feb 06, 2005 6:07 pm 
Offline
1275cc
1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2582
Location: Brisbane
Steve form Cairns has THE best cold air intake I've evr seen. Let's hope he post a pic.
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Sun Feb 06, 2005 6:26 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
U got a tig in the shed too doc?

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Feb 06, 2005 6:34 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
No, I had one at Rheem...
Not now. :cry:
But next year, the nice taxman might help me buy another.. :wink:

Actually, as it's all 2 & 3mm plate, I could have MIG'd it... :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Sun Feb 06, 2005 6:38 pm, edited 2 times in total.

Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Feb 06, 2005 6:35 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
TK wrote:
Steve form Cairns has THE best cold air intake I've evr seen. Let's hope he post a pic.

Yes, you are right TK. I've got it here still, somewhere I think..
Here it is....:wink:
Image
Image

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Sun Feb 06, 2005 7:13 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
drmini in aust wrote:
I did make one, (not quite finished as shown) it just fits on a DCOE or DHLA carb (using Redline 3005 manifold) without cutting the firewall. There is 10mm clearance. :shock:
Sold to Mini Mad (along with the 40DHLA carb) but he's not picked it up yet. :lol:
Intake horn is 70mm dia. Filter shown was to get it running, then bend some tube up and try different ram lengths. Yeah- probably a waste of time, I know. :lol:
Image


Oooo Purrty..It's mine :twisted: ...Hehe..i'll grab it in a couple of weeks kev :wink:

That one of steve's is cool, if you have a box..very nice indeed..

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
nuclear_mini
 Post subject:
PostPosted: Sun Feb 06, 2005 8:34 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Dec 12, 2004 1:31 pm
Posts: 406
Location: Liverpool - Sydney
i know a group in wollongong called berzerkly (behind the woolies petrol station near the hospital on Crown st) made one 6 odd months ago for a customer with a mini.... I believe they charged round #350.....

Call and find out (if i got the name right)

_________________
68matic: "i havent seen much head in my life "
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.