Ausmini
It is currently Mon Jun 23, 2025 6:46 pm

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 2 of 5
  [ 67 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
J_A_M
 Post subject:
PostPosted: Mon Oct 11, 2004 1:41 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Chong, I would have stayed longer but had to get to the wreckers to find that shifter. It wasn't there.....I found it when I got home (in the bottom of my toolbox :oops: )

re: Chrome strip: - Heritage MG sell it by the roll, but I think a roll will do 10 Mini's. I got mine from Colin Dodds, who works from home in Kelliville. He used to be 1/2 of Mini Spares and Repairs. If you want some now, I would advise you to try Karcraft, or Mini Spares and Repairs at Castle Hill. At least they are open on a Saturday :lol:

Next time you are in the Hills, give me a buzz and drop in. 8)
Top
 Profile  
 
Lillee
 Post subject:
PostPosted: Mon Oct 11, 2004 2:13 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
For sure mate! Cheers

_________________
Lillee - 1969 Morris Mini K
Top
 Profile  
 
Lillee
 Post subject:
PostPosted: Mon Oct 11, 2004 2:16 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
drmini in aust wrote:
I pulled the motor off it this morning..
Diff pinion (3.44:1) has a toothache- coupla teeth missing. :cry:
Rest of box looks OK, but it's not apart yet. I'll pull it right down.
The motor (1152cc) is fine- and it has a 12G295 head on it, with 1275 inlet valves, and a duplex cam chain & sprockets too.
Cam is down at Russell Eng's now, getting reground.... I'll tickle the head next weekend..:P


Wow! when am I getting all this done for mine?? :lol: :wink:

_________________
Lillee - 1969 Morris Mini K
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Oct 11, 2004 3:45 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
Er... you gotta be a `nocard carrying member' of the MDC first!

I only fix busted ones I take pity on, and they bring the bits, not the car, to me- yours ain't busted.. yet! :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
miniVan
 Post subject:
PostPosted: Mon Oct 11, 2004 3:50 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 20, 2004 5:27 pm
Posts: 426
Location: Perth, WA
yeah sorry doc.. 1098 stocky with soon to have double row timing chain (sitting beside me now)

it has 3-2-1 extractors and sports exhaust


i have two delorto 45DHLAs sitting on a 2L escort manifold with 34mm venturis (escorts getting sierra fuel injection in december so it wont need them)

doc, do you know where i can get delorto parts ex east.. cant source anything but the manifold here in perth.. seeing the correlation... i think i'm gunna have to move

interested in getting them for me (same as chong's).. overhaul kit, jets, chokes, linkage.. i can get the manifold
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Oct 11, 2004 4:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
You can get SOME Dellorto parts at Carburettor Service Co,
240 Parramatta Rd,
Burwood,
NSW.
phone # is 02 9747 4066

BUT, Dellorto bits will get to you faster and much cheaper (around 1/2 price) from UK.
log onto www.dellorto.co.uk
and email them for a price list.
Then fax them your credit card info. Stuff takes about 1 week to here via post. 8)

<EDIT> S/H Dellorto or Weber carbs from Ardita Spares or Manning Motors, both in Sydney.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
miniVan
 Post subject:
PostPosted: Mon Oct 11, 2004 5:55 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 20, 2004 5:27 pm
Posts: 426
Location: Perth, WA
cheers doc

i'm surprised that its that much cheaper.. faster doesnt surprise me with some of the service we get around here

lifesaver!!!
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Oct 11, 2004 6:02 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
miniVan wrote:
cheers doc

i'm surprised that its that much cheaper.. faster doesnt surprise me with some of the service we get around here

lifesaver!!!


I just got some air correctors- they were half the price of Carb Service Co.

If you want chokes, don't stuff about. Get from UK. Nobody here has stock, Carb Service are not really agents for Dellorto, they get stuff in from NZ.. and they had no 36 chokes there either when I wanted some. :cry:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
miniVan
 Post subject:
PostPosted: Mon Oct 11, 2004 6:09 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 20, 2004 5:27 pm
Posts: 426
Location: Perth, WA
aarrgghhh
eurocarb just forwarded my e-mail onto some aussie dealer

euro carb guy wrote:
Hi Andrew

We have a dealer in Australia I have forwarded your message to him, his
email address is above if you would like to contact him.

Let me know if you have any problems.

Best regards

Matthew Cooper
eurocarb ltd.


e-mail address he forwarded to is [email protected]

any ideas?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Oct 11, 2004 6:19 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
They did that with me but the dude was on holidays.
From his email addy he does it part time, I think. :roll:
Tell Matthew you prefer to buy direct. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
miniVan
 Post subject:
PostPosted: Mon Oct 11, 2004 6:46 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 20, 2004 5:27 pm
Posts: 426
Location: Perth, WA
crap.. now that i have the price list... what is everything that i will need from them (id hate to do an order only to realise i'll have to do another)

can i buy the gaskey kits for one carb??

i currently have 34mm chokes.. i'm thinking this is slightly on the large side for a stock 1098 with nothing more than 3-2-1 extractors and sports exhaust
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Oct 11, 2004 7:23 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
34s are fine in a 1098. That's what Chong has, it'll tootle down to 50KMH or less in 4th and pull away OK.

Check what jets and emulsion tubes are in it, then see my post above. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Oct 11, 2004 8:58 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
J_A_M wrote:
:shock: OMG....Josh posted!!

Hey Chong, nice ride mate. You must get lots of looks and comments on the road?!?! You should be proud!

Anton.


*peeks out from behind monitor* haha I better get this post count up eh?
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Oct 11, 2004 9:01 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
68Delux wrote:
Hey boys!!!

Josh! you're a man of your word! Hope things work out for your engine and sorry I had to run! I made it just in time back to strathfield :oops: I would have liked to stay to help out and learn what the problem was... what is the problem?

Oh by the way it is the dissy that was making it miss. I rechecked the contact points gap and filed away some of the gunk and it's going great now! permament fix will have to be a pulsar dissy...


Hey Chong,

No worries, glad you made it on time!

Glad you found the problem, Pulsars are the second most loved Japanese vehicle besides Honda's ;)
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Oct 11, 2004 9:06 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
drmini in aust wrote:
68Delux wrote:
Hey boys!!!

Josh! you're a man of your word! Hope things work out for your engine and sorry I had to run! I made it just in time back to strathfield :oops: I would have liked to stay to help out and learn what the problem was... what is the problem?



I pulled the motor off it this morning..
Diff pinion (3.44:1) has a toothache- coupla teeth missing. :cry:
Rest of box looks OK, but it's not apart yet. I'll pull it right down.
The motor (1152cc) is fine- and it has a 12G295 head on it, with 1275 inlet valves, and a duplex cam chain & sprockets too.
Cam is down at Russell Eng's now, getting reground.... I'll tickle the head next weekend..:P


Sorry to Hi-jack the thread!
Cheers Kev, Poor clubby...toothfairy has come to visit :) Kev can I keep the busted up pinion? Good for show and tell ;)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 5
  [ 67 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.