Another question - where can I get the light bulbs and bulb holders for smiths gauges? are there generic equivalents in Jaycar etc?

If i'm putting a different (used) rev counter does it have to be calibrated etc?

Cheers.

Best place to get gauge bulb holders is at a wrecker- these were common in many British cars.
Some servos have the bulbs in stock still.

As long as the tacho is out of a 4cylinder car it will be OK. I use a 9,000 rpm one from a Fiat 124BC coupe. It has much better needle damping than all the Smiths ones..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Ok I'll try the wreckers and might also try to find something similar at Jaycar.

Thanks.,

on canterbury rd just past the turn of for marricville that do jags i would imagine that they have the stuff you need
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".