Well guys getting somewhere with the fuel pump system. But most of all I have sorted out my balance pipe system. I will respray the tanks tomorrow and then I can put them in and hook up all the hoses...Here's a few pics...

If your wondering this is because I will be sending the return line to the right hand tank and this will be the tube that allows the flow back to the left hand tank...Also I was going to get them brazed professionally but the engineering firm I went to weren't particularly helpful so did it myself with a MIG

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

Brave mate... did you fill them up with something?

I guess you were banking on lightnight not striking twice?

_________________
"Life is not like a box of chocolates... it's more like a jar of jalapenos. Whatever you do today, may burn your arse tomorrow."

Yeah Zizzle the thought crossed my mind more than once. I actually did the welding outside! And yeah I flushed them with water for 15 mins each. I also lit some paper and dropped it down the cap end and ran. Nothing happened so I thought I was right which I guess I was...

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

A bit of news I spoke to my engineer and he indicated that the BF Goodrich braided lines that came with the Metro Four Pots are fine and he will include in the final cerficate.

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

Thats terrific news

_________________
Baracade
Relationships! The only time you get to sleep with the enemy!
1972 US Export Moke in Bundaberg QLD

yeh thats great matt... Ive been told there not looking at braided brake lines as badly as they use to, most are made to the right standard these days.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs

Yeah that is hey. So that means I can hook up the brakes and the clutch tomorrow. Also just finished spraying the Right Hand Tank. I think I should have the whole EFI system at the back done by the weekend and then comes the electrics.

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

Yes Electrics that will be Fun Fun Fun!

_________________
Blackrz
(998cc Clubman)
- = :Zone 3 Goober: = -
http://photobucket.com/albums/y142/blackrz/?sc=1

"I Live My Life A Quater Mile At A Time"

Yeah not looking forward to that one but hey the car won't run without them. Plus I have make a dash aswell..

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

Electrics are FUN

_________________
Too many cars, and too little time.

Yeah AWD doesn't that look familiar. So how far along are you now because that is obviously the floor of the moke. As for me I am just finishing painting the right hand tank and stuff.

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

I pulled the electrics so I could finish the panel work & re-route the wiring to suit.
Still lots of welding & other fiddly bits, but getting there

_________________
Too many cars, and too little time.

Well have finalised the balance pipe and return line. And have put in the left and right tanks. Just got to run a line to the fuel pump and that parts done then it is just a hookup of fuel lines to the engine and then it is onto the electrics.

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

lookin good there, somthing for me to invest in the future, another tank.. dont think 20L will last long

_________________
GTi Turbo'd mini, abused daily

Matt...great work....give me a hoy if you need a hand with the electrics spaghetti...

_________________
"Show me the Mini!"