Ausmini
It is currently Mon Jun 23, 2025 4:08 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
whizzbang
 Post subject: tail lamps
PostPosted: Mon Dec 11, 2023 7:14 pm 
Offline
848cc
848cc

Joined: Tue Oct 10, 2023 5:48 pm
Posts: 64
Has anybody managed to replace the nylon(?) inserts for the lens fixing screws in the round nose, 2 screw tail lamps. The ones on mine are mangled.
Top
 Profile  
 
Bill B
 Post subject: Re: tail lamps
PostPosted: Wed Dec 13, 2023 9:49 am 
Offline
1275cc
1275cc

Joined: Sat Feb 09, 2013 5:44 pm
Posts: 2236
Location: Camden
No, I haven't needed to replace those.
They look fairly straightforward, except for the angled shape of the grommet top. Most commonly available grommets seem to be flat-faced to fit flush on a body panel for headlights, trim etc. but I think you might still manage to make the bolts line up with the hole in a different grommet.
Another option might be to leave the damaged original grommet in place and push one of those small grommets used on the boot badges GFK7514.
Top
 Profile  
 
winabbey
 Post subject: Re: tail lamps
PostPosted: Wed Dec 13, 2023 10:39 am 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC
The nylon inserts can get damaged when a LH base is used on the RH side, and vice versa. Instead of simply rotating the insert 180 degrees some people drill a new hole in it..

How many of yours are damaged?

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
TDS76
 Post subject: Re: tail lamps
PostPosted: Wed Dec 13, 2023 1:19 pm 
Offline
848cc
848cc
User avatar

Joined: Sat Apr 02, 2016 6:36 am
Posts: 148
Location: Melbourne
Not sure if this would work on these, but i have used this method on other plastic nuts...
Fill the holes in the nylon with hot glue, then while still hot insert the screw. When it's cooled down, unscrew and hey presto, a threaded plastic nut.

Paul.

_________________
1970 Morris Mini K
Top
 Profile  
 
winabbey
 Post subject: Re: tail lamps
PostPosted: Thu Dec 14, 2023 3:22 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC
whizzbang - how many of yours are damaged?

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
whizzbang
 Post subject: Re: tail lamps
PostPosted: Thu Dec 14, 2023 4:29 pm 
Offline
848cc
848cc

Joined: Tue Oct 10, 2023 5:48 pm
Posts: 64
One on each lamp, winabbey. I like the hot glue idea from TDS76.
Top
 Profile  
 
winabbey
 Post subject: Re: tail lamps
PostPosted: Thu Dec 14, 2023 4:44 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC
whizzbang wrote:
One on each lamp, winabbey. I like the hot glue idea from TDS76.

If you message me a delivery name and address I can send you two.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
whizzbang
 Post subject: Re: tail lamps
PostPosted: Thu Dec 14, 2023 7:14 pm 
Offline
848cc
848cc

Joined: Tue Oct 10, 2023 5:48 pm
Posts: 64
Hi winabbey. That's a very noble gesture, but I live in Spain. If it's still at all viable I'd appreciate its greatly.
Top
 Profile  
 
winabbey
 Post subject: Re: tail lamps
PostPosted: Fri Dec 15, 2023 7:33 am 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC
whizzbang wrote:
Hi winabbey. That's a very noble gesture, but I live in Spain. If it's still at all viable I'd appreciate its greatly.

PM me your address.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
winabbey
 Post subject: Re: tail lamps
PostPosted: Thu Dec 21, 2023 2:32 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC
whizzbang - check your messages.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
simon k
 Post subject: Re: tail lamps
PostPosted: Sat Dec 23, 2023 9:21 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
Fill it with JB Weld and drill?

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
drmini in aust
 Post subject: Re: tail lamps
PostPosted: Sun Dec 24, 2023 7:05 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
simon k wrote:
Fill it with JB Weld and drill?

I've done that with Araldite.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 107 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.