The engine steady bracket that is welded to the bulkhead on my mini 850 shell has been removed by the previous owner. I have ordered a new bracket but I need the measurements so as to be able to weld the new bracket. Many thanks.

_________________
The bitterness of poor quality (or Crappy Workmanship) remains LONG AFTER the Sweet Taste of Low Price is forgotten.

Does/should it have the plate which goes under the master cylinders and is the top half of the bracket? That would at least give you the horizontal position.

_________________
1986 Mayfair (998 auto), 1974 S, 1974 Van, 1972 PMG Van

Too many minis

Yes thanks, I have the top bracket but I need the other measurements

_________________
The bitterness of poor quality (or Crappy Workmanship) remains LONG AFTER the Sweet Taste of Low Price is forgotten.

Bolt the body end of the engine steady together (with its top and bottom mounts).

Bolt the top mount in place.

The bottom mount will now be exactly where it needs to be welded to the cross member...

Voila!! ..as the Froggies say

Cheers, Ian

Thanks Ian

_________________
The bitterness of poor quality (or Crappy Workmanship) remains LONG AFTER the Sweet Taste of Low Price is forgotten.