Hi everyone,
When pumping up my suspension last week the hose from the pump to the schrader valve spilt.
Can anyone advise on what the best hose to replace it with is and where I can get it?
Thanks
Rod

_________________
1967 New British Racing Green Mk1 Cooper S, 1967 Lake Green 1275 MG Midget, 1969 Jet Red / Crystal White Mk2 Cooper S, 1972 Gambier Turquoise Clubman GT (ex police), 1972 Camino Gold Clubman GT, 2009 JCW Challenge Edition, Megane RS265, Clio RS220.

My pump is home made, I use Mini front brake hoses.

Any brake hose would do, maybe take the remains to a brake shop. They can make custom hoses.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

I have a grease gun pump. Grease gun flex extension rated to 1500psi with Schrader valve adapter attached

_________________
1966 Mini Deluxe - “Gabby” 34 years under restoration and counting...
1970 MGBGT
1959 MGA

The repair kit mentioned by Richard was originally supplied by Fischer-Cripps Laboratories P/L in Sydney.
At one stage Tony Cripps offered to supply any individual parts for the Churchill pump as well as a complete kit. I don't know if the offer is still available.
I would think any hydraulics shop could supply the hose but if you want the hose from the overhaul kit, the best contact details I can find for them is:
https://www.azom.com/suppliers.aspx?SupplierID=11429

It is nylon air brake hose which you can get from Pirtek or Enzed or most large truck repair shops.