Ausmini
It is currently Wed Jun 25, 2025 9:40 am

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 22 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
poeee
PostPosted: Thu Jan 20, 2005 9:01 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
What do HIF44 throttle linkage look like? About to buy a manifold and air filter for my HIF44 and was after some pix of the throttle linage, Anyone got some? I'll be searching the UK mini parts sites for pix...

_________________
Image
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Thu Jan 20, 2005 9:03 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Ok by the looks of this, it seems to be built in? Correct?

Image

_________________
Image
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu Jan 20, 2005 9:05 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
No idea... but how NICE does that look! :shock: 8)
Top
 Profile  
 
dr trim
 Post subject:
PostPosted: Thu Jan 20, 2005 9:06 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 12:38 pm
Posts: 2061
Location: adelaide
bling.
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Thu Jan 20, 2005 9:07 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Nup, I was wrong, thats the choke... needs a linkage... so still after pix!

_________________
Image
Top
 Profile  
 
brickworx
 Post subject:
PostPosted: Thu Jan 20, 2005 9:11 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Dec 14, 2004 9:38 am
Posts: 2008
Location: Adelaide, South Australia
Looks in the picture to have a non adjustable cable....
be careful of hif carbs.... some accelerator cables pull fom underneath and some from on top

_________________
Miniworx Centre 0883741299
Sooperdooperminicooperexpertengineering
Online BMW Mini Shop
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Thu Jan 20, 2005 9:47 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Here is my HIF44. The throttle is to be pulled from the top.

http://www.australianbilliards.com.au/m ... _hif44.jpg

_________________
Image
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Thu Jan 20, 2005 10:02 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Many thanks to Zizzle who took some pix for me!

http://www.slabathon.com/~matt/monster_truck/hif44/

Thats exactally what I need for my carbie. Anyone got one? Oh... need an inlet manifold, too!

_________________
Image
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Fri Jan 21, 2005 7:25 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
pooee"http://www.slabathon.com/~matt/monster_truck/hif44/ [/quote]

with that linkage, the cable wraps around underneath the curved part at the front/below the butterfly, and is secured by the bolt thingy with the screw going into it - if that's the carb you're getting, with those linkages (throttle & choke) on it, you don't need anything else

[quote="poeee wrote:
need an inlet manifold, too!


if you get desperate, you can use a single 1 1/5" manifold, just needs to be opened up a bit, only uses 2 of the bolt holes, or you could get a bit of aluminuim and make yourself an adapter plate

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
Mini68
 Post subject:
PostPosted: Fri Jan 21, 2005 7:50 am 
Offline
848cc
848cc
User avatar

Joined: Tue Nov 16, 2004 3:37 pm
Posts: 218
Location: Phillip Island VIC
You will need a throtle bracket as well. This holds the throttle cable, original type airfilter box and is a heat shield. You will also need the part that the outer throttle cable fits into and a carb spacer. You can see all these in the last picture you posted. I got a throttle bracket from Northern Mini Parts. You may need to modify the bracket slightly depending on how thick a carb spacer you can fit.

Kris
Top
 Profile  
 
1380 yellow devil
 Post subject:
PostPosted: Fri Jan 21, 2005 8:42 am 
Offline
998cc
998cc
User avatar

Joined: Tue Mar 23, 2004 9:52 pm
Posts: 874
Location: Bundaberg QLD
Looks like you got all the info Me to slow and that looks just like mine but I now have a HF piston and spring instead of the HIF Bearing Dash Pot as it was going up to fast and giving me a flat spot.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Fri Jan 21, 2005 9:46 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
1380 yellow devil wrote:
Looks like you got all the info Me to slow and that looks just like mine but I now have a HF piston and spring instead of the HIF Bearing Dash Pot as it was going up to fast and giving me a flat spot.


You can control that with thicker oil, cant you?

_________________
Image
Top
 Profile  
 
1380 yellow devil
 Post subject:
PostPosted: Fri Jan 21, 2005 11:57 am 
Offline
998cc
998cc
User avatar

Joined: Tue Mar 23, 2004 9:52 pm
Posts: 874
Location: Bundaberg QLD
yeah but never worked for me as i went up to a 60 grade with no luck.
But I did not try a heavier spring as local supplier did not have one at the time so it got the hs type and stuck that on and all sweet.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)
Top
 Profile  
 
min13k
 Post subject:
PostPosted: Fri Jan 21, 2005 2:40 pm 
Offline
I DWIVE A BIG TWUCK
I DWIVE A BIG TWUCK
User avatar

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732
my hif had a little bracket like the one in the picture
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".
Top
 Profile  
 
MadMin
 Post subject:
PostPosted: Fri Jan 21, 2005 6:34 pm 
Offline
848cc
848cc

Joined: Sun Aug 22, 2004 7:27 am
Posts: 93
Location: Orange NSW
Still does Makka :D

_________________
Who's MadMax?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 22 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.