ausmini • View topic - Mk2 Front Wiring Loom Advice

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Mk2 Front Wiring Loom Advice

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

cooperess

Post subject: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 8:37 am

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

Attachment:

Mini Rear Wiring Plug DSCF0491.JPG

My front wiring loom has been abused with many soldered in wires some of which are melted.

The above picture is a 9 pin connector to the rear loom (which is fine).

Where can I buy a replacement front loom with black tape for a 1969 Mk2 Cooper S with an external regulator that will plug into the pictured 9 pin rear plug? A part number might help track one down.

You do not have the required permissions to view the files attached to this post.

Top

winabbey

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 10:06 am

1360cc

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC

https://www.vinwire.com.au/

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

Top

winabbey

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 12:30 pm

1360cc

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6743
Location: Melbourne, VIC

The MK II Cooper S main harness (i.e. front) part number is AYA9221, or 9223 with reversing lights and 9224 with two speed wipers and reversing lights (the last two originally for SPO41 spec vehicles).

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

Top

cooperess

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 12:38 pm

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

Thanks winabbey

Top

cooperess

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 3:02 pm

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

Has anybody used the Vinwire Mk2 front harness and did it mate up to the existing rear harness?

Top

Stibbsy

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 5:05 pm

848cc

Joined: Sun Mar 16, 2014 11:01 am
Posts: 462
Location: TOWNSVILLE NQ

cooperess wrote:

Has anybody used the Vinwire Mk2 front harness and did it mate up to the existing rear harness?

Yeas it does! There is a spare wire at my wiper motor for 2 speed motor. Even a circuit for a thermal fan, if you want one. Also a a wire for tachometer. Can highly recommend Vinwire.

Top

IndigoBlueCooperS

Post subject: Re: Mk2 Front Wiring Loom Advice

Posted: Mon Dec 21, 2020 8:33 pm

998cc

Joined: Sun Nov 06, 2005 5:41 pm
Posts: 859
Location: Adelaide

Does the Vinwire loom have the correct 9 pin plug or just bullet connectors?

Top

Page 1 of 1

[ 7 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: jpodge and 79 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: