Ausmini
It is currently Sat Jul 19, 2025 11:21 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 456 of 568
  [ 8519 posts ]  Go to page Previous  1 ... 453, 454, 455, 456, 457, 458, 459 ... 568  Next
  Print view Previous topic | Next topic 
Author Message
drmini in aust
PostPosted: Sun Apr 06, 2014 6:54 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Mick wrote:
They do sell the UNC, not that they're useful for anything being non tensile...

Most of what you think is UNC (in cup head bolts etc) is actually Whitworth. Was the main bolt standard here until fairly recently.
TPI of Whitworth is the same as UNC, except 1/2" is 12 not 13. Thread angle is 55deg not 60, but the nuts fit except the 1/2".

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
drjbeam
PostPosted: Sun Apr 06, 2014 9:18 pm 
Offline
1098cc
1098cc

Joined: Thu Jan 07, 2010 11:31 am
Posts: 1564
Location: st marys
davem wrote:
drmini in aust wrote:
davem wrote:
Thanks everyone, unfortunately l went to bleed the brakes and one of the front caliper bleed nipples had snapped off in transit from minisport, I've tried masters hardware, repco and autobarn with no luck!

Try a real brake shop on Monday.

Bunnings are pretty effin' useless unless it fits a house, I went looking for some Stag jointing compound today and just got blank stares. :roll:



Very true, though I will give credit to masters they have a pretty good range of fixings, for automotive, mechanical works, 20x better than any "Sunday auto store"


Masters have champion draws with most of there stuff http://www.championpartsonline.com.au/ masters is on the st marys leauges club block
Top
 Profile  
 
Thorlek
PostPosted: Sun Apr 06, 2014 11:10 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jan 08, 2006 12:04 am
Posts: 648
Location: Ballarat, Victoria
today never ended...

it started off as replacing wheel bearings at my placed, then it progressed to my father-in-laws to get his 10ton press.....

then we discovered the drive shaft boot was damaged (the gear box end) and when investigating that... the drive shaft *fell* out.

Either way, there were only 4 ball bearings instead of 6.... so that put a stop to that.. need some parts. probably I good thing we gave it a little yank.

So we decided to do the other wheel bearing while the press was at my place.... everything was going perfectly on that side... until the brake hose cross threaded and stripped when were were putting it back on... need some parts... grr

freaking painful day today...

_________________
1975 Hairy Lime/White Clubby
Build Thread: http://www.ausmini.com/forums/viewtopic.php?f=3&t=80657
Top
 Profile  
 
clovus
PostPosted: Mon Apr 07, 2014 1:46 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Jun 30, 2010 8:02 pm
Posts: 806
Location: Woody Point 4019
Pulled my shock absorber tower mounts off in my quest to find any rust. After seeing what is behind there on some of the pommie cars I was surprised to find good clean steel. A bit of rusty dust around the screw holes only. Whew! Very happy now. Time to start my plan for the two spots of rust repair and prevention everywhere else.

_________________
"Beware the lollipop of mediocrity: lick it once and you'll suck forever" Brian Wilson
Top
 Profile  
 
drmini in aust
PostPosted: Mon Apr 07, 2014 2:18 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Got a stone chip in my nice 9 month old laminated windscreen. The screen was free from Shannons, but looks like I'll be paying to fix the chip. :cry:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
danny_
PostPosted: Tue Apr 08, 2014 5:58 pm 
Offline
998cc
998cc
User avatar

Joined: Sat Jul 23, 2011 9:32 pm
Posts: 1171
Location: Sydney (St George area)
Cleaned it for the first time in 3 weeks.
Image

_________________
http://www.flickr.com/by_dan
Current: 1970 Mini K 2014 Focus ST
Past: 93 Rover, 64 850, 97 Rover, 66 Deluxe, 66 Moke
81 Austin Estate, 2006 R53MCS, 66 Deluxe, 1978 Clubbie
2014 Land Rover Defender 90
Top
 Profile  
 
simon k
PostPosted: Tue Apr 08, 2014 6:02 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
drmini in aust wrote:
Got a stone chip in my nice 9 month old laminated windscreen. The screen was free from Shannons, but looks like I'll be paying to fix the chip. :cry:


only another 3 months and Shannons will give you a new one

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
drmini in aust
PostPosted: Tue Apr 08, 2014 10:57 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
simon k wrote:
drmini in aust wrote:
Got a stone chip in my nice 9 month old laminated windscreen. The screen was free from Shannons, but looks like I'll be paying to fix the chip. :cry:


only another 3 months and Shannons will give you a new one


I wasn't game to drive it in case it spread, and didn't want to park it 3 months. Soooo, O'Briens fixed it today, $152. I'd requested a quote from the other mob starting with N, but they failed to contact me, so meh.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
1275van
PostPosted: Thu Apr 10, 2014 12:48 am 
Offline
848cc
848cc
User avatar

Joined: Sat Jul 14, 2012 10:46 pm
Posts: 54
Location: Melbourne
Got loose with the grinder!!! [SEE-NO-EVIL MONKEY]Image

_________________
[email protected]
Top
 Profile  
 
timmy201
PostPosted: Fri Apr 11, 2014 8:22 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4501
Location: Wollongong, NSW
Took it for a rego check yesterday and passed!

_________________
Image
Top
 Profile  
 
Slugman
PostPosted: Fri Apr 11, 2014 12:54 pm 
Offline
848cc
848cc

Joined: Fri Oct 03, 2008 4:09 pm
Posts: 80
Location: Darwin, Oz
Took it for a rego check & ........ failed. *sigh* Minor gearbox oil leak & leaking exhaust.
Decided to bring forward the exhaust mods. Dropped it off to get a 2.5" stainless system installed. :)
Afterwards I'll take it back to the guys who did the gearbox work & get the 'box leak fixed.

_________________
1.8L Sunshine - Legal, legit & lovinit
Top
 Profile  
 
drmini in aust
PostPosted: Fri Apr 11, 2014 1:34 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Refitted 165 main jets in the Dellorto instead of 160s. It might use slightly more fuel but it's less fussy when cold & goes harder!

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
clovus
PostPosted: Fri Apr 11, 2014 1:44 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Jun 30, 2010 8:02 pm
Posts: 806
Location: Woody Point 4019
drmini in aust wrote:
?...It might use slightly more fuel but it's less fussy when cold & goes harder!



Sounds just like my wife!

_________________
"Beware the lollipop of mediocrity: lick it once and you'll suck forever" Brian Wilson
Top
 Profile  
 
Mick
PostPosted: Fri Apr 11, 2014 2:19 pm 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18887
Location: Under the bonnet son!
1275van wrote:
Got loose with the grinder!!! [SEE-NO-EVIL MONKEY]



Intense :shock:

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
Speedwell Racer
PostPosted: Mon Apr 14, 2014 3:36 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Jun 09, 2011 4:26 pm
Posts: 593
Location: Howrah, Tasmania
Put a new clutch slave in!!
The other one only lasted a bit over a year!! :evil:
Lets see how this one goes!!

_________________
2000 Holden Rodeo TD - The Daily
1998 JDM Mitsubishi Lancer Evolution V -The Weekender
1977 Leyland Mini 998cc, 1293cc in the works - The project
1977 Leyland Mini Van - Sold
1966 Morris Mini Deluxe - Sold
2004 MINI Cooper S Chilli - Sold
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 456 of 568
  [ 8519 posts ]  Go to page Previous  1 ... 453, 454, 455, 456, 457, 458, 459 ... 568  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Majestic-12 [Bot] and 95 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.