Ausmini
It is currently Sun Jul 06, 2025 4:47 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 21 of 568
  [ 8519 posts ]  Go to page Previous  1 ... 18, 19, 20, 21, 22, 23, 24 ... 568  Next
  Print view Previous topic | Next topic 
Author Message
micowen
 Post subject:
PostPosted: Sun May 10, 2009 11:02 am 
Offline
1098cc
1098cc
User avatar

Joined: Mon Mar 30, 2009 5:38 pm
Posts: 1650
Location: macquarie fields NSW
It works out to be approx 1 foot per 4 hours!
Measure it twice, cut it once as they say!
I dont see the sence in doing it half arsed, you will only have to fix it again down the track!

_________________
Chuck Norris is the only person alive who can kick you in the back of the face!!
mooo, I'm a pig!
Top
 Profile  
 
BALLISTIC
 Post subject:
PostPosted: Sun May 10, 2009 11:42 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria
:( I looked at it and wished i was able to go on the run up to Kinglake........but its mothers day and I would have been "in more trouble than Falsh Gordon" if I was anywhere else but home:!:

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU
Top
 Profile  
 
Clutch-monkey
 Post subject:
PostPosted: Sun May 10, 2009 12:06 pm 
Offline
848cc
848cc

Joined: Sun Mar 29, 2009 7:14 pm
Posts: 226
Location: Brisbane
was going to take it and my mum up to maclean's bridge
no go :(



it didn't start took the triumph instead :lol:
Top
 Profile  
 
Fiji
 Post subject:
PostPosted: Sun May 10, 2009 3:22 pm 
Offline
1098cc
1098cc

Joined: Mon Jul 10, 2006 5:59 pm
Posts: 1275
Location: Bris / Syd
redid the c.v. boots ( and actually installed the circlips 8) ) jeeze the first one took me ages............. i figure out ho w to do it tho and the 2nd one took 5 mins.
and test drive all seem s to be ok.. :lol:

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt
Top
 Profile  
 
Tombo
 Post subject:
PostPosted: Sun May 10, 2009 5:19 pm 
Offline
Tomboss Breweros
User avatar

Joined: Wed Dec 31, 2008 9:57 pm
Posts: 7514
Location: Causing mayhem in northern rAdelaide
paint

_________________
Dean Hutton's first car was a Mini.

kimini wrote:
:mrgreen: It's the boobs and testosterone that make this place fun-ner :lol: !!

Jimmyinamini wrote:
It's not nice to throw spank on the floor.
Top
 Profile  
 
Trixitrine
 Post subject:
PostPosted: Sun May 10, 2009 5:37 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Nov 20, 2005 7:52 pm
Posts: 771
Location: Melbourne
I drove mine! :D

to kinglake, with mum in the passenger seat.... was fun

_________________
Image

Size DOES Matter!!!
Top
 Profile  
 
frednutz&co
 Post subject:
PostPosted: Sun May 10, 2009 5:38 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 09, 2007 2:01 pm
Posts: 3293
Location: melbourne ferntreegully
took it out for a little drive to blow the cobwebs out.
ferntreegully to croydon ,lilydale.yarraglen,st andrews.kinglake.pheasantscreek.kinglake,marrysville,yarraglen,lilydaleand back to ferntreegully.just a little run. :lol:
Top
 Profile  
 
John Smidt
 Post subject:
PostPosted: Sun May 10, 2009 5:59 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
BALLISTIC wrote:
:( I looked at it and wished i was able to go on the run up to Kinglake........but its mothers day and I would have been "in more trouble than Falsh Gordon" if I was anywhere else but home:!:

I love this. My Dad, Rest His Soul, used this saying and so do I But most people look :? when I say it
Top
 Profile  
 
scotta_74
 Post subject:
PostPosted: Sun May 10, 2009 6:16 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Aug 03, 2006 11:47 am
Posts: 1212
Location: In Transit, Sydney
John Smidt wrote:
BALLISTIC wrote:
:( I looked at it and wished i was able to go on the run up to Kinglake........but its mothers day and I would have been "in more trouble than Falsh Gordon" if I was anywhere else but home:!:

I love this. My Dad, Rest His Soul, used this saying and so do I But most people look :? when I say it


That's because you are very old and drool when you say it, besides it sounds like your saying "Gerg gave me this rash on my ........" :shock:

_________________
Your silliness has been noted.
Top
 Profile  
 
gerg
 Post subject:
PostPosted: Sun May 10, 2009 6:23 pm 
Offline
The Forkmeister
User avatar

Joined: Sun Sep 17, 2006 3:33 pm
Posts: 1029
Location: camden
scotta_74 wrote:
John Smidt wrote:
BALLISTIC wrote:
:( I looked at it and wished i was able to go on the run up to Kinglake........but its mothers day and I would have been "in more trouble than Falsh Gordon" if I was anywhere else but home:!:

I love this. My Dad, Rest His Soul, used this saying and so do I But most people look :? when I say it


That's because you are very old and drool when you say it, besides it sounds like your saying "Gerg gave me this rash on my ........" :shock:


Hey!!, leave me out of this.... :roll: :D

_________________
Image
May the fork be with you.
Top
 Profile  
 
Mick
 Post subject:
PostPosted: Sun May 10, 2009 6:28 pm 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18887
Location: Under the bonnet son!
Adjusted the timing a little, and enjoyed the improvement around the local block...

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
74snail
 Post subject:
PostPosted: Sun May 10, 2009 6:42 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed Oct 01, 2008 11:02 pm
Posts: 2611
Location: werribee vic
I spent the best part of the weekend sorting out a gear lever rattle and floor vibration, when I did the recon run for the GOR Tour I hit a concrete gutter ,unbeknown to me I actually rammed a bolt through the floor. It was only when I was finally happy with how the gear lever was sitting with no rattle that I found the hole where the bolt used to sit by cutting my finger on it, so next weekend its out with the mig welder. I fixed the gear lever by adding two extra washers above the spring and packing grease into the spring, taking the gear lever in and out a few times doesnt sound like it should take long, but its the lining up the four screws through the frame and boot rubber to the floor that takes a while.

_________________
Image
Top
 Profile  
 
travhill_78
 Post subject:
PostPosted: Sun May 10, 2009 6:56 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Apr 01, 2009 6:08 pm
Posts: 65
Location: Ocean Grove, VIC
Nothing!
Top
 Profile  
 
floss
 Post subject:
PostPosted: Sun May 10, 2009 8:33 pm 
Offline
1098cc
1098cc
User avatar

Joined: Sun Oct 10, 2004 4:04 pm
Posts: 1533
Location: melbourne, victoria
Saturday I adjusted Tappets, did up uni joint boots and installed new clutch MC and got it bled and working.
Today I started installing my new wiring loom.... its real purdy like and cotton wrapped. I just need to work out what the hell I am doing... wish me luck!
Top
 Profile  
 
chopchop
 Post subject:
PostPosted: Sun May 10, 2009 8:51 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed May 11, 2005 10:31 pm
Posts: 3747
Location: Altona, Melbourne
started it for the first time in about 3 months
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 21 of 568
  [ 8519 posts ]  Go to page Previous  1 ... 18, 19, 20, 21, 22, 23, 24 ... 568  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.