ausmini • View topic - Keith Dodd 1.5 Forged Rockers.

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Keith Dodd 1.5 Forged Rockers.

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

LS1380

Post subject: Keith Dodd 1.5 Forged Rockers.

Posted: Thu Oct 25, 2007 9:53 pm

Moke + Wife = out of the doghouse

Joined: Thu Aug 18, 2005 11:41 pm
Posts: 2645
Location: Perth-Western Australia

Not the best pic-

Question:
On this set-up,at the exhaust rockers on the end,is there suppose to be a coil washer?Or does this set-up run a flat washer only?

_________________
_______________________________________________________________________________

Top

drmini in aust

Post subject:

Posted: Thu Oct 25, 2007 10:10 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39753
Location: near Baulkham Hills, NSW

Pretty sure it's flat washer only. Like a Cooper S.
I'll check mine tomorrow if you like. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

LS1380

Post subject:

Posted: Thu Oct 25, 2007 10:25 pm

Moke + Wife = out of the doghouse

Joined: Thu Aug 18, 2005 11:41 pm
Posts: 2645
Location: Perth-Western Australia

Thanks-Much appreciated.
This set-up has only flat washers-no coil washer and very noisy at number No1.(clearance checked and double checked).

_________________
_______________________________________________________________________________

Top

drmini in aust

Post subject:

Posted: Thu Oct 25, 2007 10:40 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39753
Location: near Baulkham Hills, NSW

If there's room for a coil washer fit it, otherwise make a thicker washer to take up the slack.
Are you sure it's not a worn bush....

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

LS1380

Post subject:

Posted: Thu Oct 25, 2007 10:47 pm

Moke + Wife = out of the doghouse

Joined: Thu Aug 18, 2005 11:41 pm
Posts: 2645
Location: Perth-Western Australia

drmini in aust wrote:

If there's room for a coil washer fit it, otherwise make a thicker washer to take up the slack.
Are you sure it's not a worn bush....

Thanks-Thats next....it sounds like a hot EH 179 with hydraulic lifters :oops:

_________________
_______________________________________________________________________________

Top

drmini in aust

Post subject:

Posted: Sun Oct 28, 2007 10:00 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39753
Location: near Baulkham Hills, NSW

OK I just checked mine- yes they DO have the coil spring each end, and a flat washer.

You buy these Minispares forged rockers as a kit- all you get is the rockers, a HD shaft and 4 new posts.
You make your own arrangements regarding using your old parts on assembly. I apparently had room for the coil springs.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

LS1380

Post subject:

Posted: Sun Oct 28, 2007 8:02 pm

Moke + Wife = out of the doghouse

Joined: Thu Aug 18, 2005 11:41 pm
Posts: 2645
Location: Perth-Western Australia

Thanks Kevin-I'm going to muck around with the coil spring,but I'm thinking bush as well.

_________________
_______________________________________________________________________________

Top

Page 1 of 1

[ 7 posts ]

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: