hey
in the process of building a dash i bought my tacho(2 and 3/4 / so its not huge) and i took it out of the box to measure a hole to cut, now dumb a$$ me has lost the wiring instructions,

anychance someone has this diagram lying around,

_________________
any parts for a 76 clubby pm me or ring 0405 329 326

http://www.ausmini.com/forums/viewtopic.php?t=44717

This is the rear of my speco tacho

If it is the 2 5/8" Pro series gauge then use these instructions:

"Matthew,

Green wire connects to “S” terminal and to negative side of coil. If there is an aftermarket tacho pick up wire, connect to this wire instead of negative side of coil.

Black wire to “G” terminal and to earth.

Red wire to “I” terminal and to ignition switch.

White wire connects to the thick black wire from lighting globe assembly and then to dash lights.

Regards,

Bob Forrest
Speco Thomas"

Cheers
Matt

_________________
68 Deluxe.... it's shiny..... I like shiny!!

sorry guys completly forgot all about this thread,

theres a group of them red, green, white, black,

theres a big black one at the top and another small white one,
stupid enough of me to get the thing out of the box

_________________
any parts for a 76 clubby pm me or ring 0405 329 326

http://www.ausmini.com/forums/viewtopic.php?t=44717

a pic might help