Ausmini
It is currently Sun Jun 29, 2025 3:55 am

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
justminis
 Post subject: Camshaft ID
PostPosted: Mon Jul 25, 2005 8:36 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Have 2 small bore modified camshafts that are stamped -

1. "102"
2. "CE761B"

Anybody any idea what these might be? Many thanks.

_________________
Steve
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Jul 25, 2005 10:17 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
I checked both the Wade Cams and Ivan Tighe sites, and my Camtech catalog, but those numbers don't ring a bell..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
justminis
 Post subject:
PostPosted: Tue Jul 26, 2005 7:22 am 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Thanks Kev. I did the quick scan too but no luck. I "think" the 102 maybe a Tighe cam because the 3 numbers sort of fit his numbering, perhaps an older grind. Car is also from SE Qld and engine rebuilt mid 90's.
NFI with the other one. May have to set them up and measure, thought I would try here first!

_________________
Steve
Top
 Profile  
 
Christoph
 Post subject:
PostPosted: Tue Jul 26, 2005 5:16 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Apr 26, 2004 12:04 am
Posts: 200
Location: Canberra, A.C.T.
My guess would be that 102 is what the cam should be timed in at... 102 degrees max lift on inlet? just an idea
Top
 Profile  
 
ken@miniauto
 Post subject: Camshaft ID
PostPosted: Tue Jul 26, 2005 7:05 pm 
Offline
848cc
848cc
User avatar

Joined: Sat Jul 16, 2005 9:46 pm
Posts: 170
Location: Ipswich
Steve
CE761B is ground by Camshaft Engineering in Brisbane
Cam specs
In timing 56/14
Ex timing 18/52
Cam lobe lift 0.255"

ken
Top
 Profile  
 
justminis
 Post subject:
PostPosted: Tue Jul 26, 2005 8:02 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Excellent Mr Nelson, should have asked the guru in the first place! Any idea on the other one? Welcome aboard!

_________________
Steve
Top
 Profile  
 
9YaTaH
 Post subject: Ken
PostPosted: Tue Jul 26, 2005 10:10 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Welcome Ken....looking forward to some words of Mini wisdom :!:

_________________
"Show me the Mini!"
Top
 Profile  
 
TK
 Post subject:
PostPosted: Wed Jul 27, 2005 7:20 am 
Offline
1275cc
1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2582
Location: Brisbane
Yay!!! Ken's here. 'bout bloody time.
;)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.