Ausmini
It is currently Sun Dec 22, 2024 4:28 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
rodaz
 Post subject: 3D Print
PostPosted: Wed Mar 15, 2023 7:10 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Jun 06, 2010 6:03 pm
Posts: 58
Location: Central Victoria
I needed a neat solution to mount my tachometer. A quick design in Fusion 360 and off to the resin printer. It could be used for any 50mm gauge. Left or right side of the cluster.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
braad
 Post subject: Re: 3D Print
PostPosted: Wed Mar 15, 2023 8:16 pm 
Offline
998cc
998cc
User avatar

Joined: Sun May 24, 2009 1:25 am
Posts: 749
Location: St George, Parramatta
Very nice! I really like how people are utilising 3D printing to make or recreate parts

_________________
1963 850 - laid up
1970 Morris mini K van - eating up the kms!
Top
 Profile  
 
jaybee
 Post subject: Re: 3D Print
PostPosted: Wed Mar 15, 2023 8:27 pm 
Offline
848cc
848cc

Joined: Mon Apr 25, 2022 6:38 pm
Posts: 73
:)
Nice work
Top
 Profile  
 
surtees
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 7:11 am 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 16, 2012 10:59 am
Posts: 803
Location: Geelong, Vic
Nice work, very neat solution.

_________________
I have an Addiction just not the time.......
1966 Morris Mini Deluxe http://www.ausmini.com/forums/viewtopic.php?t=80459
1968 Morris 1100 viewtopic.php?f=3&t=101555
Top
 Profile  
 
Gambo
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 7:44 am 
Offline
848cc
848cc
User avatar

Joined: Wed Mar 08, 2017 1:27 pm
Posts: 126
Location: Wollongong
Fantastic work, any chance you could share the file for others to print?

_________________
67 Van, 1275cc
Top
 Profile  
 
cooperess
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 10:11 am 
Offline
1098cc
1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1563
Location: Brandy Hill, NSW
I need a tacho, does it work well and what is the part number?
Top
 Profile  
 
rodaz
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 7:20 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Jun 06, 2010 6:03 pm
Posts: 58
Location: Central Victoria
Gambo wrote:
Fantastic work, any chance you could share the file for others to print?

I have put it up on Thingaverse.
https://www.thingiverse.com/thing:5913417
Top
 Profile  
 
rodaz
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 7:26 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Jun 06, 2010 6:03 pm
Posts: 58
Location: Central Victoria
cooperess wrote:
I need a tacho, does it work well and what is the part number?

The tacho works ok, as does the temp and oil gauges. I chose this brand because the temp and oil gauges are electronic. Search for "Tachometer gauge 8000 RPM Speco Street 52mm 2" black 523-20"
Top
 Profile  
 
cooperess
 Post subject: Re: 3D Print
PostPosted: Thu Mar 16, 2023 8:14 pm 
Offline
1098cc
1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1563
Location: Brandy Hill, NSW
rodaz wrote:
cooperess wrote:
I need a tacho, does it work well and what is the part number?

The tacho works ok, as does the temp and oil gauges. I chose this brand because the temp and oil gauges are electronic. Search for "Tachometer gauge 8000 RPM Speco Street 52mm 2" black 523-20"
Thank you.
Top
 Profile  
 
Gambo
 Post subject: Re: 3D Print
PostPosted: Fri Mar 17, 2023 7:48 am 
Offline
848cc
848cc
User avatar

Joined: Wed Mar 08, 2017 1:27 pm
Posts: 126
Location: Wollongong
rodaz wrote:
Gambo wrote:
Fantastic work, any chance you could share the file for others to print?

I have put it up on Thingaverse.
https://www.thingiverse.com/thing:5913417


Champion - thanks!

_________________
67 Van, 1275cc
Top
 Profile  
 
Gambo
 Post subject: Re: 3D Print
PostPosted: Mon Aug 28, 2023 2:54 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Mar 08, 2017 1:27 pm
Posts: 126
Location: Wollongong
Had a friend print this for me last week, came out absolutely top notch. Thanks again!

_________________
67 Van, 1275cc
Top
 Profile  
 
Steam
 Post subject: Re: 3D Print
PostPosted: Mon Aug 28, 2023 5:19 pm 
Offline
998cc
998cc
User avatar

Joined: Fri May 03, 2019 7:17 am
Posts: 633
Nice pod.
A Speco 52mm tacho I have, the needle bounces around, not sure of the model though.

_________________
Cheers Dave.
Top
 Profile  
 
drmini in aust
 Post subject: Re: 3D Print
PostPosted: Tue Aug 29, 2023 9:44 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39702
Location: near Baulkham Hills, NSW
That looks neat I agree.
I needed a bigger tachometer so got an Autogage one. Made by autometer.
https://www.ebay.com.au/itm/164408368664
The body rotates 360° so you just screw it to the shroud.

I've had mine for years it's accurate and well damped.

Edit
And it's half the price of a Smiths.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Mon Aug 12, 2024 10:43 am, edited 1 time in total.

Top
 Profile  
 
GuamMini
 Post subject: Re: 3D Print
PostPosted: Mon Aug 12, 2024 10:02 am 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 362
Location: Mangilao, Guam
Nice

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.