This is an image that I have found which looks close to what I want BUT it isn't in line with the relay wiring.
Attachment:
pre-engaged_starter_post-88.gif
Currently the Brown and Brown/Red wires are connected to the relay.
The diagram shows that:
- the brown wire connects from the Starter to the Fuse box.
- the Brown/Red wire connects from the Starter to the Relay
- a Brown wire connects from the Relay to the Fuse box
I could do this by removing the current Brown wire from the Relay and connect it to the Fuse box.
But then... what fuse/link would I use?
Jason