So I bought a rover mini dash for my wifes project car.



Issue I have is the car is a 1968 car (missing wirng loom but I digress) So original wiring would not have suited.

This is the connector on the cluster



Does anyone know for instance if the wiring plug off a leyland mini would suit this? or do I need to source something specific to the rover mini??? (or something else built in england in the '80's)

Thanks

Nearly 100 people viewed this post & no-one even had an opinion - i'm actually amazed

So due to an underwhelming response, I visited a mini specalist this morning (as I was in the area)

$5 later I have a leyland mini dash plug - so it does fit - (if anyone actually cares mind you)

T

Rover Minis are thin on the ground here as they were never sold. So most folks, me included have never had a Rover dash PCB to compare it.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Never heard of a 1968 Rover Mini.

Nobody mentioned 1968 rover mini......

I think he's putting a Rover instrument cluster into a 68 mini !

_________________
Find a job you love and you will never have to go to work !