Should be PHH I think?
Yes they do bolt up, bolt pattern is the same.
For jets etc I would try Carburettor Service Co in Burwood, Sydney. If they don't have, they would know who does.
| ausmini https://ausmini.com/forums/ |
|
| Solex Side draft carby https://ausmini.com/forums/viewtopic.php?f=5&t=9840 |
Page 1 of 1 |
| Author: | ronniemac [ Sat Aug 06, 2005 9:58 pm ] |
| Post subject: | Solex Side draft carby |
I have picked up a couple of Solex PPH-2 twin barel side draft carbys from a swap meet today for $ 20. Both have broken throttle bodies where they bolt onto the manifold but seem to be in good condition otherwise. My question is will they bolt up to a Webber or Delorto manifold and what style is best for a clubman, and where could i get gaskets and jets from? I have also posted on the wanted section for another throtle body as i dont know if these can be welded to repair them. |
|
| Author: | drmini in aust [ Sun Aug 07, 2005 4:33 am ] |
| Post subject: | |
Should be PHH I think? Yes they do bolt up, bolt pattern is the same. For jets etc I would try Carburettor Service Co in Burwood, Sydney. If they don't have, they would know who does.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|