Quick Quesion..I had to replace the rear brake cyclinder in Morris today and changed to 5/8 rear's..well one...Yes the other will be done on the weekend before anyone mentions...but...Am I correct you have to re drill the fixing hole
| ausmini https://ausmini.com/forums/ |
|
| Cooper front end and 5/8 rear Brake Cyclinder https://ausmini.com/forums/viewtopic.php?f=5&t=9498 |
Page 1 of 1 |
| Author: | gafmo [ Tue Jul 26, 2005 10:13 pm ] |
| Post subject: | Cooper front end and 5/8 rear Brake Cyclinder |
Quick Quesion..I had to replace the rear brake cyclinder in Morris today and changed to 5/8 rear's..well one...Yes the other will be done on the weekend before anyone mentions...but...Am I correct you have to re drill the fixing hole
|
|
| Author: | ken@miniauto [ Tue Jul 26, 2005 10:31 pm ] |
| Post subject: | |
Yes 5/8 cylinders have the locating pin on the opposite side to 3/4 ken |
|
| Author: | drmini in aust [ Tue Jul 26, 2005 10:38 pm ] |
| Post subject: | |
Don't be tempted to just leave the pin out- the cylinder will float about if you do. |
|
| Author: | gafmo [ Wed Jul 27, 2005 5:28 pm ] |
| Post subject: | |
Cheers for that...yer I redrilled a new hole..as both were the same 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|