Well just completed finalising the engine side of the gearchange. Here's a couple of pics.
Cheers
| ausmini https://ausmini.com/forums/ |
|
| Starlet Gearchange almost done... https://ausmini.com/forums/viewtopic.php?f=5&t=8574 |
Page 1 of 1 |
| Author: | minstar [ Wed Jun 29, 2005 6:43 pm ] |
| Post subject: | Starlet Gearchange almost done... |
Well just completed finalising the engine side of the gearchange. Here's a couple of pics.
Cheers |
|
| Author: | GT1360 [ Wed Jun 29, 2005 6:50 pm ] |
| Post subject: | |
she is a tight fit.. 
should start the new pics setion in the conversions forum.. 
|
|
| Author: | Archangel007 [ Wed Jun 29, 2005 7:01 pm ] |
| Post subject: | |
Hey Matt, Nice work champ! I know when I come to doing mine that the fit will be no less tight. Did the motor come out for you to do that or was it done in situ? Andrew |
|
| Author: | minstar [ Wed Jun 29, 2005 7:10 pm ] |
| Post subject: | |
The aperture in the tower was done with the engine out, but alas to judge where you put the aperture the engin has to be in  . The rest was done insitu. Had to make a custom bracket because the moving forward of the arm form its original position means the location point needs to be stepped back.
|
|
| Author: | Archangel007 [ Wed Jun 29, 2005 7:16 pm ] |
| Post subject: | |
Matt, Gotcha! How does it shift? Is it notchy at all with the revised arms? Andrew |
|
| Author: | minstar [ Thu Jun 30, 2005 6:23 pm ] |
| Post subject: | |
Mate haven't got that far yet. But should have something sorted by the weekend and I will give you a bell. |
|
| Author: | Archangel007 [ Fri Jul 01, 2005 3:57 pm ] |
| Post subject: | |
Cheers! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|