ausmini
https://ausmini.com/forums/

Converting from auto for manual
https://ausmini.com/forums/viewtopic.php?f=5&t=82892		 Page 1 of 1
Author:  Plantman [ Thu Sep 26, 2013 11:59 am ]
Post subject:  Converting from auto for manual
Hi all,

Just wondering what's involved with converting from auto to manual. Is it simple or so different that it is not worth it? I would be on an 88 Rover mini

Cheers
Author:  drmini in aust [ Thu Sep 26, 2013 12:16 pm ]
Post subject:  Re: Converting from auto for manual
Mechanically:
If you want to fit a manual engine + gearbox you will either need a manual Rover subframe , or else modify the one you have to take the manual gearbox mounts (your auto subby is wider than a manual one).

If you are referring to converting the existing auto motor (different oilways) to work on a manual gearbox, see my sticky thread at top of this forum.
[edit] Topic has disappeared, I will find out where it went... :shock:
Author:  Plantman [ Thu Sep 26, 2013 12:25 pm ]
Post subject:  Re: Converting from auto for manual
Thanks for the reply. Yeah was looking at possibly purchasing an auto and wondered the implications of swapping it over to a manual. I'm probably better of looking for a manual

Cheers
Author:  drmini in aust [ Thu Sep 26, 2013 1:51 pm ]
Post subject:  Re: Converting from auto for manual
Here's that auto block to manual thread, apparently all the sticky threads came loose when transferred to the new forum and slid down the listing..
viewtopic.php?f=5&t=1461
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/