The standard 3 gauge leyland cluster screws to the back of the wood grain dash. I don't know about non standard gauges.
| ausmini https://ausmini.com/forums/ |
|
| Dash and gauges https://ausmini.com/forums/viewtopic.php?f=5&t=78781 |
Page 1 of 1 |
| Author: | womble99 [ Wed Oct 10, 2012 4:42 pm ] |
| Post subject: | Dash and gauges |
I am thinking about putting a woodgrain dash into the mini, probably like this one http://www.minisport.com.au/prod1673.htm I am interested to hear if other have used a similar, if so what size gauges did you use and where were they available from? Does a three gauge cluster fit? So far I can find gauges for the smaller holes fairly easily but the larger gauges don't seem to be very common? cheers, CJ |
|
| Author: | dalmeny [ Fri Oct 12, 2012 9:19 pm ] |
| Post subject: | |
The standard 3 gauge leyland cluster screws to the back of the wood grain dash. I don't know about non standard gauges.
|
|
| Author: | womble99 [ Thu Oct 18, 2012 4:42 pm ] |
| Post subject: | |
Excellent, I have 2 sets of triple gauge clusters to choose from 
No idea if either of them work 
Next question, can you get new face cards for the Leyland gauges to make them look a little better? |
|
| Author: | dalmeny [ Thu Oct 18, 2012 11:29 pm ] |
| Post subject: | |
My taco was a second hand non goer from the mini king. Took it to a a speedo and instrument place and they fitted a new circuit card in the back, retaining the original plastic body and face. |
|
| Author: | MiniBill [ Thu Oct 18, 2012 11:43 pm ] |
| Post subject: | Re: Dash and gauges |
womble99 wrote: I am thinking about putting a woodgrain dash into the mini, probably like this one http://www.minisport.com.au/prod1673.htm
I am interested to hear if other have used a similar, if so what size gauges did you use and where were they available from? Does a three gauge cluster fit? So far I can find gauges for the smaller holes fairly easily but the larger gauges don't seem to be very common? cheers, CJ Jeebus thats pricey , im going to try knock one up myself i think " and when that fails buy one lol " |
|
| Author: | womble99 [ Fri Oct 19, 2012 2:24 pm ] |
| Post subject: | Re: Dash and gauges |
MiniBill wrote: womble99 wrote: I am thinking about putting a woodgrain dash into the mini, probably like this one http://www.minisport.com.au/prod1673.htm I am interested to hear if other have used a similar, if so what size gauges did you use and where were they available from? Does a three gauge cluster fit? So far I can find gauges for the smaller holes fairly easily but the larger gauges don't seem to be very common? cheers, CJ Jeebus thats pricey , im going to try knock one up myself i think " and when that fails buy one lol " lol I never said I would buy that one  I am looking for one like it, most likely import it myself
|
|
| Author: | dalmeny [ Fri Oct 19, 2012 9:19 pm ] |
| Post subject: | |
The one above was 130 pounds and 80 pounds shipping from Huddersfield UK. You can work out the dollar conversion
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|