| ausmini https://ausmini.com/forums/ |
|
| Which ring goes on top? https://ausmini.com/forums/viewtopic.php?f=5&t=75750 |
Page 1 of 1 |
| Author: | miniDave [ Thu Mar 01, 2012 5:07 pm ] |
| Post subject: | Which ring goes on top? |
OK so I have set of GR's pistons and one ring is lighter coloured and has a angle on the outer (scraper ring?). The other one is darker and has square edge on outer. I know I should call GR but have already today about other things and don't want to sound like I am a complete *&%^head . . . which I am. 
|
|
| Author: | drmini in aust [ Thu Mar 01, 2012 7:59 pm ] |
| Post subject: | |
Dave, If the rings from GR are in a plain box they would be Nippon rings. Is there an N mark on the compression rings? According to the link below, this goes up ^^^ http://honda-tech.com/showthread.php?t=2324000 |
|
| Author: | miniDave [ Thu Mar 01, 2012 8:39 pm ] |
| Post subject: | |
Thanks Kev - rings have 'R 200' on both. Called in the see the guy that builds my Monaro engines and he was confident in writing to the top and the darker ring in the second slot: 
|
|
| Author: | drmini in aust [ Thu Mar 01, 2012 8:56 pm ] |
| Post subject: | |
Yep, that top ring is hardchromed. Goes in top groove. |
|
| Author: | GT mowog [ Sat Mar 03, 2012 8:22 pm ] |
| Post subject: | |
Are there No Instructions like all other ring manufacturer's supply with their products? |
|
| Author: | miniDave [ Sat Mar 03, 2012 10:18 pm ] |
| Post subject: | |
GT mowog wrote: Are there No Instructions like all other ring manufacturer's supply with their products?
No - thought it would be better to ask. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|