| ausmini https://ausmini.com/forums/ |
|
| Setting the cam timing for a RE13 https://ausmini.com/forums/viewtopic.php?f=5&t=75570 |
Page 1 of 1 |
| Author: | mini bug [ Sun Feb 19, 2012 9:45 am ] |
| Post subject: | Setting the cam timing for a RE13 |
What would be the degrees after TDC to set it up a RE13 cam? |
|
| Author: | simon k [ Sun Feb 19, 2012 10:03 am ] |
| Post subject: | |
GR usually engraves it on the end - mine is 105.5 |
|
| Author: | Mini68 [ Sun Feb 19, 2012 1:35 pm ] |
| Post subject: | |
http://www.ausmini.com/forums/viewtopic ... highlight= |
|
| Author: | mini bug [ Tue Feb 21, 2012 5:28 pm ] |
| Post subject: | |
Great Thanks for the info ! |
|
| Author: | drmini in aust [ Wed Feb 22, 2012 8:27 pm ] |
| Post subject: | |
simon k wrote: GR usually engraves it on the end - mine is 105.5
Lately he engraves it on the cam body. That number is actually the LCA that he's ground the cam to, it just so happens if you dial the cam in `straight up' as they say, it is the max intake lobe lift point ATDC. [edit] LCA = Lobe Centreline Angle, = measured angle between the intake and exhaust lobes on the cam. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|