| ausmini https://ausmini.com/forums/ |
|
| Prepin the Mini??? https://ausmini.com/forums/viewtopic.php?f=5&t=6920 |
Page 1 of 1 |
| Author: | =twista= [ Thu May 05, 2005 5:07 pm ] |
| Post subject: | Prepin the Mini??? |
Ok guys, fellas, can someone please list all the steps to prep my car to be ready for a paint job? From the dints and scratchs to the priming and ready to slap paint on it....and all the nessesary primers and paper i need to get to do the job Would be greatly appreiated twista |
|
| Author: | Fruity [ Thu May 05, 2005 6:24 pm ] |
| Post subject: | |
Even tho I'm not a fella 
I'll give you my advice by saying browse this website http://www.justanothermini.com The guy on that site claims to know what he's talking about OR do an ausmini search on prep cause there are loads on threads on paint prep..
(only cause some members hate people posting the same topics and asking the same questions  )
I'm preping my 850 at the moment myself.. |
|
| Author: | J_A_M [ Thu May 05, 2005 10:19 pm ] |
| Post subject: | |
oooohhh Trae...that was SOOOOO well said!
|
|
| Author: | =twista= [ Thu May 05, 2005 10:59 pm ] |
| Post subject: | |
But jam the thing i have with ur site is that it doesnt have any pane/bogg filler work, like i gotta to some dint repairing on the body, how do u go about it? |
|
| Author: | J_A_M [ Fri May 06, 2005 9:00 am ] |
| Post subject: | |
BOG - Mix, skim fill, block back with coarse paper, skim fill again, block back...etc. Don't fill any dent in one go - you won't get it right. Use a really wide filler tool - not a pissy little plastic thing you get with some brands of BOG. DENTS - If you can get behind them, use a panel beaters kit ($25 from Supa Cr@p) to tap out the dents. Don't expect to get them perfect. Aim to tap them out enough for skim filling. Heating the panel with an OXY torch can help tap out creases, but go easy, or you can warp large flat panels. |
|
| Author: | =twista= [ Fri May 06, 2005 5:10 pm ] |
| Post subject: | |
thanks jam, as u can tell im nu to this shiznit... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|