IF you can work out how to move the RHD rack rearwards by 1-1/2", it'll fit..
Shouldn't be rocket science, ay!
| ausmini https://ausmini.com/forums/ |
|
| VTEC frame in CA for STD length roundnose.. pics https://ausmini.com/forums/viewtopic.php?f=5&t=5846 |
Page 1 of 1 |
| Author: | drmini in aust [ Sun Mar 27, 2005 4:06 pm ] |
| Post subject: | VTEC frame in CA for STD length roundnose.. pics |
Pulled this off MiniMania site. Looks sweet, except LHD only, as the ^(&$*@ RHD Mini rack is in the way of the diff. http://www.minimania.com/web/startretur ... thread.cfm |
|
| Author: | kazjim [ Sun Mar 27, 2005 5:39 pm ] |
| Post subject: | |
What about an alternative rack ? Maybe a Gemini or Miata one ? anyone investigating ? J |
|
| Author: | drmini in aust [ Sun Mar 27, 2005 6:51 pm ] |
| Post subject: | |
IF you can work out how to move the RHD rack rearwards by 1-1/2", it'll fit..
Shouldn't be rocket science, ay! |
|
| Author: | Chris [ Sun Mar 27, 2005 10:37 pm ] |
| Post subject: | |
I was reading on the 16 valve forum where the UK guys are having problems with the floor pans in their Honda conversions around the rear mount area. It appears to be bending the floor pan. Much debate on the correct type of strengthening that appears to be needed. There again most of them appear to be manic leadfoots. |
|
| Author: | supercharged 850 [ Mon Mar 28, 2005 12:06 am ] |
| Post subject: | |
If somebody was going to the trouble of fitting a VTEC into their shell, its probably at a point where cutting and welding the shell is not a problem.... In this case, could they GRAFT a channel into the floor that the steering rack would recess into?? The only problem I would see with this is the allowable pedal travel distance would be halved  That would be a problem, I guess 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|