ausmini https://ausmini.com/forums/ |
|
Clutch kit on ebay... is it the right one? https://ausmini.com/forums/viewtopic.php?f=5&t=4909 |
Page 1 of 1 |
Author: | skimini82 [ Sat Feb 19, 2005 7:48 pm ] |
Post subject: | Clutch kit on ebay... is it the right one? |
Hi all, Just looking at getting a clutch kit for my mini (1978 clubman 998), and was wondering if i could get a 2nd opinion on this one to see if it is going to be the right one? http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 86606&rd=1 Please reply with any ideas you have Thanks Brad |
Author: | Mini Mad [ Sat Feb 19, 2005 8:08 pm ] |
Post subject: | |
I wouldn't rush into it, it's got 5 hours to go, hopefully someone who knows will chime in. It looks a bit dodgy to me with that pic.. Your in QLD and it's in VIC..so i think you should check out Karcraft who generally are the cheapest around as they import most of the stuff for mini's into the country.. Did you get a quote from the seller for shipping? |
Author: | J_A_M [ Sat Feb 19, 2005 8:28 pm ] |
Post subject: | |
no offence to this ebay seller, he/she is probably really nice, but......THEIR STUFF IS F**KING EXPENSIVE! I can buy almost anything they are selling there for 2/3 of their price. |
Author: | Morris 1100 [ Sat Feb 19, 2005 8:45 pm ] |
Post subject: | |
Call Repco and your local parts place (not Supercheap) and see what price you can get on one local, then call some of the Mini places. That bloke on ebay is selling them all the time, so if you miss this one there will be another. But my opinion is do not buy that one on Ebay because it it too expensive and the postage will be about $40 or more! |
Author: | Wombat [ Sat Feb 19, 2005 9:14 pm ] |
Post subject: | |
"This is NEW in packet, unopened and in Excellent condition" - how did he take the photo ![]() |
Author: | Morris 1100 [ Sat Feb 19, 2005 9:27 pm ] |
Post subject: | |
Because the one in the photo is not a mini clutch! Not even close! ![]() |
Author: | Mini Mad [ Sat Feb 19, 2005 10:12 pm ] |
Post subject: | |
Looks like he just grabbed that pic off some website.. |
Author: | drmini in aust [ Sun Feb 20, 2005 5:44 am ] |
Post subject: | |
Having used and fitted many Mini clutches, I say be wary of non-genuine ones. The diaphragms are weak, the Jap bearings are crap and the plate facings are like recycled cornflakes packets. Barney had one in when we bought it, and it shuddered like crap. ![]() I'd buy a proper Borg & Beck clutch kit, then you know what you are getting. For example, $107.40 at Karcraft. These are for an S, but will fit a 998/1098, no problem. A QH one for an S (next best) is $93.50. ![]() |
Author: | skimini82 [ Sun Feb 20, 2005 9:41 am ] |
Post subject: | |
Thanks for your advice... I looked at the kits on minispares and they were like 50 pounds so i thought 99 aussie dolars would have been alright. I have got some mini engine mounts from these guys... i will see how they come up... i would think it would be worth my while to do the engine mounts and clutch at the same time.. you guys agree?? Brad |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |