| ausmini https://ausmini.com/forums/ |
|
| speedo position regulations? https://ausmini.com/forums/viewtopic.php?f=5&t=475 |
Page 1 of 1 |
| Author: | ausminis4u [ Sat May 01, 2004 6:19 pm ] |
| Post subject: | speedo position regulations? |
im fitting a mdf dash to my mini , where the gauges are at the moment i cant see the speedo  so i wat thinking of moving the whole 3 gauge cluster ( mini clubman that is) to the middle of the dash before i make up a new dash board, is there any regulations in gauge positioning? concidering i cant see them at the moment 
|
|
| Author: | Anto [ Sat May 01, 2004 9:04 pm ] |
| Post subject: | |
Here in Canberra there is a Rover 1.3i running round with the triple guage cluster mounted centrally. In fact in the UK you can buy wood dashboards set up like this (the 1.3i has one I believe).] Couldn't see any dramas - after all, Minis had them centrally to begin with - and modern cars such as those bloody Toyota Echos have them centrally, so I guess it is ADR compliant. Anto. |
|
| Author: | PhildoD [ Sun May 02, 2004 9:22 pm ] |
| Post subject: | |
One of the guys at work has been given a Nissan X-Trail as a hire car while his is at the panelbeaters. It's another car with a tiny speedo in the centre console, and the tacho is on the FAR side. |
|
| Author: | MiniK [ Mon May 03, 2004 4:28 pm ] |
| Post subject: | |
PhildoD wrote: One of the guys at work has been given a Nissan X-Trail as a hire car while his is at the panelbeaters. It's another car with a tiny speedo in the centre console, and the tacho is on the FAR side.
tacho on the far side......seems pretty stupid..the again it is a Nissan. i cant see an issue with it being in the centre! As long as you can see the mofo! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|