ausmini
https://ausmini.com/forums/

custom cold air box for mini????
https://ausmini.com/forums/viewtopic.php?f=5&t=4580		 Page 1 of 1
Author:  minifreak1 [ Sat Feb 05, 2005 8:48 pm ]
Post subject:  custom cold air box for mini????
hi people was just after some help regarding a custom cold air induction box to fit onto a webber 45dcoe???

Have been looking at getting on for some time now.
link automotive made one but the guy that makes them harnes i think he is called stopped making them as they were a tad hard to reproduce and some of them didnt fit quite well. theres was a good one from what i saw with all the proper induction porting insde the main chamber and it was made from alloy and had two entrences both around the 2 inch wide area.

dose anyone out there have one off theses???
if so do you think it makes a diffeence???
and dose anyone out there in mini land know of anyone who sells a kit that fits onto a webber and onto a mini?????

any help would be great.

thanks...from minifreak1

email ... [email protected]
Author:  drmini in aust [ Sat Feb 05, 2005 10:49 pm ]
Post subject: 
I did make one, (not quite finished as shown) it just fits on a DCOE or DHLA carb (using Redline 3005 manifold) without cutting the firewall. There is 10mm clearance. :shock:
Sold to Mini Mad (along with the 40DHLA carb) but he's not picked it up yet. :lol:
Intake horn is 70mm dia. Filter shown was to get it running, then bend some tube up and try different ram lengths. Yeah- probably a waste of time, I know. :lol:
Image
Author:  TK [ Sun Feb 06, 2005 6:07 pm ]
Post subject: 
Steve form Cairns has THE best cold air intake I've evr seen. Let's hope he post a pic.
Author:  poeee [ Sun Feb 06, 2005 6:26 pm ]
Post subject: 
U got a tig in the shed too doc?
Author:  drmini in aust [ Sun Feb 06, 2005 6:34 pm ]
Post subject: 
No, I had one at Rheem...
Not now. :cry:
But next year, the nice taxman might help me buy another.. :wink:

Actually, as it's all 2 & 3mm plate, I could have MIG'd it... :P
Author:  drmini in aust [ Sun Feb 06, 2005 6:35 pm ]
Post subject: 
TK wrote:
Steve form Cairns has THE best cold air intake I've evr seen. Let's hope he post a pic.

Yes, you are right TK. I've got it here still, somewhere I think..
Here it is....:wink:
Image
Image
Author:  Mini Mad [ Sun Feb 06, 2005 7:13 pm ]
Post subject: 
drmini in aust wrote:
I did make one, (not quite finished as shown) it just fits on a DCOE or DHLA carb (using Redline 3005 manifold) without cutting the firewall. There is 10mm clearance. :shock:
Sold to Mini Mad (along with the 40DHLA carb) but he's not picked it up yet. :lol:
Intake horn is 70mm dia. Filter shown was to get it running, then bend some tube up and try different ram lengths. Yeah- probably a waste of time, I know. :lol:
Image


Oooo Purrty..It's mine :twisted: ...Hehe..i'll grab it in a couple of weeks kev :wink:

That one of steve's is cool, if you have a box..very nice indeed..
Author:  nuclear_mini [ Sun Feb 06, 2005 8:34 pm ]
Post subject: 
i know a group in wollongong called berzerkly (behind the woolies petrol station near the hospital on Crown st) made one 6 odd months ago for a customer with a mini.... I believe they charged round #350.....

Call and find out (if i got the name right)
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/