| ausmini https://ausmini.com/forums/ |
|
| DELLORTO carb parts https://ausmini.com/forums/viewtopic.php?f=5&t=418 |
Page 1 of 1 |
| Author: | drmini in aust [ Fri Apr 23, 2004 7:18 pm ] |
| Post subject: | DELLORTO carb parts |
Hey after much ringing around I finally found out who carries jets, chokes etc for Dellorto DHLA sidedraft carbs (copy of a Weber DCOE) in Sydney. Dellorto car carbs are now out of production, but Carburettor Service Co, 240 Parramatta Rd Burwood, have jets and repair kits, and can get most other parts. I bought a bunch of jets there today, and ordered some bigger chokes.. I'll have a play with it at Wakefield tomorrow. 
|
|
| Author: | ausminis4u [ Fri Apr 23, 2004 7:59 pm ] |
| Post subject: | Re: DELLORTO carb parts |
drmini in aust wrote: Hey after much ringing around I finally found out who carries jets, chokes etc for Dellorto DHLA sidedraft carbs (copy of a Weber DCOE) in Sydney. thanx for the info doc:)
Dellorto car carbs are now out of production, but Carburettor Service Co, 240 Parramatta Rd Burwood, have jets and repair kits, and can get most other parts. I bought a bunch of jets there today, and ordered some bigger chokes.. I'll have a play with it at Wakefield tomorrow. |
|
| Author: | drmini in aust [ Sat Apr 24, 2004 8:49 pm ] |
| Post subject: | |
I pulled the 145 main jets today and put 150s in it. More mid range torque now.. must try some 155s tomorrow... 
This 1310 motor is like grandfather's axe- it's had 3 blocks, 2 heads, 2 cranks, 4 camshafts, 2 Weber manifolds and 2 LCBs. Would you believe the same carb jets have been in it since I bought it 10 years ago.. until today!
<edit> I put the 155 mains in this morning and it goes even HARDER! Seamless power all the way from 2500 up..
Now where are those 160s...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|