hi,

I built a 1360 with a 31/36 cylinder fully flowed and shape chamber.the cr will be 10.8 and a hl 1.5 and a 3.11 gear box.

I would like an engine nervous and torquey. and I don't run over 7000rpm

since july I try to buy a morspeed trackday camshaft but, it's very very hard to have one.

which one do you advise me?

_________________
www.moroccominiraid.blogspot.com

I'd talk to Keith Calver, he gets Piper cams in UK to grind Graham Russell's cam profiles for him.
http://www.calverst.com/shopopen.htm
See his RE13PP one.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

I`d say you`d be hard pushed to get it to rev anywhere near 7000rpms in top gear with that 3.1:1 diff ratio anyways, but yes defantely talk with keith Calver before you build it.

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

in my previous engine , I had a morspeed trackday cam, but a lobe was destroy after 300km and I don't know why....
I was very happy from it, but now I can't succed in find an other one...
I try to phone to morspeed but impossible...

if this week I can't phone to simon, I 'll the cam from keith....

_________________
www.moroccominiraid.blogspot.com