ausmini
https://ausmini.com/forums/

Cooper S Board Holders
https://ausmini.com/forums/viewtopic.php?f=5&t=3679		 Page 1 of 2
Author:  1380 yellow devil [ Wed Dec 29, 2004 9:21 am ]
Post subject:  Cooper S Board Holders
Can anyone give me some drawings or sizes on making the Cooper S Board Holders for the Boot.

I have a boot board and want to hold it in place just the same as a Cooper S is.
Author:  dani [ Wed Dec 29, 2004 2:31 pm ]
Post subject: 
i have some out at the moment i have taken some pics of them with a tape measure. if you pm an email addy i will send them to you (theres a few of them)
Author:  dani [ Wed Dec 29, 2004 2:34 pm ]
Post subject: 
ooops email addy there already LOL will send them now. excuse me, im having a blonde day
Author:  Karcraft [ Wed Dec 29, 2004 6:41 pm ]
Post subject: 
Are you aware that you can buy these already made ? Most of the Mini shops should be able to supply them. :P
Author:  IwannaMini [ Thu Dec 30, 2004 7:43 am ]
Post subject: 
Might be a stupid question, but how do you prevent these boards from bending? most of the board sits on the spare tyre in the boot but then there is about an inch or so clearance above the battery/rest of the boot floor. Over time, the board bends down on this side. (well it has in my boot at least).

Is it just a matter of chocking it up on this side?
Author:  gafmo [ Thu Dec 30, 2004 7:44 am ]
Post subject: 
Thats what the bracket is for
Author:  IwannaMini [ Thu Dec 30, 2004 8:01 am ]
Post subject: 
gafmo wrote:
Thats what the bracket is for


:shock: bracket..?? This will need explaining..!! :wink:
Author:  drmini in aust [ Thu Dec 30, 2004 9:30 am ]
Post subject: 
Cooper S had a pair of brackets that the boot board sat on to keep it level. :wink:
Author:  Rupert [ Thu Dec 30, 2004 1:22 pm ]
Post subject: 
The Cooper 'S' Clubman GT had five brackets to hold the boot board in place, Two at the front and three at the rear.
Author:  1380 yellow devil [ Thu Dec 30, 2004 1:31 pm ]
Post subject: 
Thanks For the Info I will have to try and make some Now.

Or I Might Try Karcraft and see if they have any also.

But I think If i Make that would give Mine My Own Touch
Author:  danidad [ Thu Dec 30, 2004 1:54 pm ]
Post subject: 
did you get all the pics from Danielle?
Author:  1380 yellow devil [ Thu Dec 30, 2004 1:57 pm ]
Post subject: 
danidad wrote:
did you get all the pics from Danielle?


Yep All are here Now

Thanks.
Author:  drmini in aust [ Thu Dec 30, 2004 2:10 pm ]
Post subject: 
Rupert wrote:
The Cooper 'S' Clubman GT had five brackets to hold the boot board in place, Two at the front and three at the rear.


Yeah I remember now- it's been 20 years since we owned a `real' one, LOL.
Sold it for $1,400! :shock:
Author:  IwannaMini [ Thu Dec 30, 2004 4:11 pm ]
Post subject: 
danidad wrote:
did you get all the pics from Danielle?


Are you able to send those pics to me too..?

[email protected]

:D
Author:  IwannaMini [ Sat Jan 01, 2005 3:28 pm ]
Post subject: 
danidad wrote:
did you get all the pics from Danielle?


Thanks for sending them to me as well. Do you have a picture of how they are mounted on the actual car? I am imagining that these would join on the outer of the boot (where the boot joins the car) but then what props the board up the other side on the back of the rear seats. Are these screwed into that metal as well?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/