Ausmini
It is currently Tue Jun 24, 2025 7:22 pm

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 4
  [ 46 posts ]  Go to page 1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
Baracade
 Post subject: 8-port Cross Flow Head
PostPosted: Mon Nov 29, 2004 10:38 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Oct 25, 2004 7:17 pm
Posts: 1121
Location: Bundaberg, QLD
Hey Guys,

Just wondering who knows what about 8-port heads

Smiles

Bara
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Nov 30, 2004 5:54 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
You can get the Elder 8 port out here- it's made in Sydney!
Speak with Graham Russell, or Greg at Mini Classic.... if you got enough $$$$. 8)

Probably `illegal' on your LS though- where would you plumb in the air injection etc you don't have... :lol: :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Tue Nov 30, 2004 8:13 pm, edited 1 time in total.

Top
 Profile  
 
ausminis4u
 Post subject:
PostPosted: Tue Nov 30, 2004 11:27 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 1:10 pm
Posts: 2606
Location: sthn highlands nsw
drmini in aust wrote:
You can get the Elder 8 port out here- it's made in Sydney!
Speak with Graham Russell or Greg at Mini Classic.... if you got enough $$$$. 8)

Probably `illegal' on your LS though- where would you plumb in the air injection etc you don't have... :lol: :lol:
but who would know ;)
email:
[email protected] ( i think thats his adress)

_________________
lookin for another clubby
Top
 Profile  
 
sg
 Post subject:
PostPosted: Tue Nov 30, 2004 4:14 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Aug 07, 2004 7:51 am
Posts: 2935
Location: Manly West, Brisbane, Qld
8 port head = not much money to spend on the rest of the car :shock: :shock: :shock: :shock:

_________________
I got nuthin......................
Top
 Profile  
 
9YaTaH
PostPosted: Tue Nov 30, 2004 6:26 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
drmini in aust wrote:
You can get the Elder 8 port out here- it's made in Sydney!
Speak with Graham Russell or Greg at Mini Classic.... if you got enough $$$$. 8)

Probably `illegal' on your LS though- where would you plumb in the air injection etc you don't have... :lol: :lol:


http://kenelder.tsx.org/

Barra, as the Doc rightly pointed out, the green Clubby on the run around Canberra after the S&S has an Elder with four Mikuni's on it....all you had to do was ask Peter to lift the bonnett...Cheers, Mick

_________________
"Show me the Mini!"
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Nov 30, 2004 6:29 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
sg wrote:
8 port head = not much money to spend on the rest of the car :shock: :shock: :shock: :shock:

And, the performance benefits are overstated, IMO. If they were the bees knees, they would beat all the 5 port motors on the track. And no, they don't. :wink:

The Elder head is not the best one to get, though. Takes lots of work to make it flow properly, according to a bloke who ports & flow tests them..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
9YaTaH
 Post subject: Too True!!
PostPosted: Tue Nov 30, 2004 6:49 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
drmini in aust wrote:
sg wrote:
8 port head = not much money to spend on the rest of the car :shock: :shock: :shock: :shock:

And, the performance benefits are overstated, IMO. If they were the bees knees, they would beat all the 5 port motors on the track. And no, they don't. :wink:

The Elder head is not the best one to get, though. Takes lots of work to make it flow properly, according to a bloke who ports & flow tests them..


Doc too too true....however.....(and this is a new word for me)....the BLING FACTOR is tremendous!!! 8)

_________________
"Show me the Mini!"
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Tue Nov 30, 2004 6:56 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
what is the cost of one of these 8 ports say compared to the kad twincam head???

Maybe the bmw bike head matt read is building is the way to go???

Whats the most power an a series engine has ever made naturally aspirated? and what head did it have. I know guys in the uk saying there making 160hp (at the engine) with the kad head, on 1380 engines running webers.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Nov 30, 2004 7:12 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
KAD reckoned their DOHC 16V race head would make about 200HP with the right bits.

Most 8 porters (and the AKM 7 port) still have 8 valves and use pushrods.

I think the Elder one is $3-4K, the KAD is a ridiculous price. Arden 8 port is in between, as is the AKM 7 port. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
sg
 Post subject:
PostPosted: Tue Nov 30, 2004 8:03 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Aug 07, 2004 7:51 am
Posts: 2935
Location: Manly West, Brisbane, Qld
I would love a Jack Knight 16V head......... but at many thousands of dollars it is just not justified....as the Doc has mentioned.......... there are many ways to skin a cat.... so to speak :oops:

_________________
I got nuthin......................
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Nov 30, 2004 8:15 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
sg wrote:
I would love a Jack Knight 16V head......... but at many thousands of dollars it is just not justified....as the Doc has mentioned.......... there are many ways to skin a cat.... so to speak :oops:


Pretty sure the JK head is now NLA- read something a while back.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Tue Nov 30, 2004 8:18 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
yeh i spose its a cost v power with all the options. Dont forget to get any big horsepower from any of the heads you will need a very decent bottom end.

Im pretty happy with my 16v twincam head, cost half the price of the kads or elder. Oh and that was with a nice 1332 bolted onto it with turbo,intercooler,efi and 5 speed box hahahaha.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
drmini in aust
 Post subject: Re: Too True!!
PostPosted: Tue Nov 30, 2004 8:26 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
9YaTaH wrote:
Doc too too true....however.....(and this is a new word for me)....the BLING FACTOR is tremendous!!! 8)

You can get a BLING ALLOY POLISHED 5 port from Pierce Manifolds- check this link-
nice crossflows for MGB too (what a waste..)
http://www.piercemanifolds.com/cylinderheads.htm
8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
9YaTaH
 Post subject: Hmmmmmmmmmmmmmmm
PostPosted: Tue Nov 30, 2004 8:31 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
13secmini wrote:
yeh i spose its a cost v power with all the options. Dont forget to get any big horsepower from any of the heads you will need a very decent bottom end.

Im pretty happy with my 16v twincam head, cost half the price of the kads or elder. Oh and that was with a nice 1332 bolted onto it with turbo,intercooler,efi and 5 speed box hahahaha.


Very hard to argue with the logic 13sec -- not to mention basically understressed even when "rowed along"....what about dollars per horsepower...probably way cheaper there as well :!:

_________________
"Show me the Mini!"
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Tue Nov 30, 2004 8:58 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
well to build a full house a series engine ( 8port or twincam not including gearbox) i could build a whole mini with 4efte toyota engine conversion ready for rego.

Im looking at around 180hp (at the wheels) and that is on a fully stock engine and taking it easy on it (there is one 4efte in sydney with over 340hp at the wheels)

Some say its now not a mini, well technically no it isnt, but you wouldnt know unless i lifted the bonnet :D

In the end it is a 200hp motor for under 2 grand, and it comes with a 5 speed attached.

But it just isnt quite a mini anymore :(

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 4
  [ 46 posts ]  Go to page 1, 2, 3, 4  Next

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.