i've got one of these kits... just wonderin how much boost they run???
cheers...
lucas
| ausmini https://ausmini.com/forums/ |
|
| PLEASE WHERE CAN I BUY AN SC12 FITMENT KIT? https://ausmini.com/forums/viewtopic.php?f=5&t=30162 |
Page 1 of 1 |
| Author: | dubbomini [ Sun Apr 08, 2007 1:01 am ] |
| Post subject: | PLEASE WHERE CAN I BUY AN SC12 FITMENT KIT? |
HI I'm new and I am lookingfor AN SC12 supercharger FITMENT KIT? and how much are they i have read all the posts but there is no definitive answer to the cost or where to source them fromthanks in Advancee rgds Michael |
|
| Author: | gafmo [ Sun Apr 08, 2007 1:03 am ] |
| Post subject: | |
You should read a little harder...You missed it..but the Guys in Adl will help you ..His name is number 92 |
|
| Author: | slinkey inc [ Sun Apr 08, 2007 10:31 am ] |
| Post subject: | |
PM '92' as said above (with ''s in the name of course). He makes and sells them for about $850 but don't hold me to that, prices may have changed. |
|
| Author: | supercharged 850 [ Sun Apr 08, 2007 7:16 pm ] |
| Post subject: | |
PM Ben at the following link http://www.ausmini.com/forums/profile.php?mode=viewprofile&u=919 |
|
| Author: | minimechanic [ Tue Apr 10, 2007 10:34 pm ] |
| Post subject: | |
i've got one of these kits... just wonderin how much boost they run??? cheers... lucas
|
|
| Author: | supercharged 850 [ Wed Apr 11, 2007 12:18 am ] |
| Post subject: | |
You'll never know until you hook up a boost gauge..... |
|
| Author: | minimechanic [ Wed Apr 11, 2007 1:10 am ] |
| Post subject: | |
all the pulley sizes are the same so i just wannna know what other people are making for boost?? i'm guessing at around 8?? there is also a formula for figuring out how much boost you will run.. cant remember it though.. i just wanna know how much boost to run to get an idea of needle sizes... post ur combinations up please?? yes i know that i have to get it dyno'd and i will.... i just wanna get it started.. |
|
| Author: | slo_firo [ Wed Apr 11, 2007 5:33 am ] |
| Post subject: | |
mine runs 8-10 on an autometer boost gauge i dont know how accurate it is now though, this is on a fairly stock A+ metro motor tip... dont try start it on a factory needle.... the backfiring ect just about wrecked my boost gauge and the flames out the release valve got a bit painfull while trying to get it to idle hahahah |
|
| Author: | Spaceboy [ Wed Apr 11, 2007 7:27 am ] |
| Post subject: | |
|
|
| Author: | slo_firo [ Wed Apr 11, 2007 12:36 pm ] |
| Post subject: | |
| indeed, i took it to a tuner - took him a while to get a good needle, i think he ended up modifying one,
but yea my poor boost gauge has never been the same since lol, it started reading 20 psi and rising to 30, so i pulled it apart and messed around with it, all good now just a little inaccurate |
|
| Author: | slinkey inc [ Wed Apr 11, 2007 4:25 pm ] |
| Post subject: | |
I think mine makes about 7psi. Well I'll give it a real good thrashing next week, now that I have a different needle and seat on my carby ready to go in it should run a bit nicer. 
The more cc's you have less boost it will make. I have 1330cc. A 998 or 1100 will make more boost. There is a bunch of equations that work out how much boost it will make but a key component is the pulley ratio, I'm not sure what it is. |
|
| Author: | dubbomini [ Wed Apr 11, 2007 7:53 pm ] |
| Post subject: | |
can we make a sticky for all the sc12 kitted cars etc? that would be great there seems to be a few of us now rgds |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|