All I can suggest is check the condition of the cage in the bearings.
I pulled a box apart once to find bits of the cage missing.
Check the syncros too.
| ausmini https://ausmini.com/forums/ |
|
| Gearbox overview https://ausmini.com/forums/viewtopic.php?f=5&t=28575 |
Page 1 of 1 |
| Author: | mini-dunger [ Mon Feb 26, 2007 10:21 pm ] |
| Post subject: | Gearbox overview |
HI guys I have just popped the gearbox of my motor. Appart from pulling it to bits is there any things I can inspect, measure etc to get a general idea of the overall condition of the box?. Is there things I should be looking for?. All the gears seem to be in good nic theres no apparant wear marks etc etc. The reason I ask is because I have 2 boxes a rod change and a remote change, I want to be able to choose the better one before I spend any money. Thanks in advance guys Michael |
|
| Author: | Harley [ Tue Feb 27, 2007 9:11 am ] |
| Post subject: | |
All I can suggest is check the condition of the cage in the bearings. I pulled a box apart once to find bits of the cage missing. Check the syncros too.
|
|
| Author: | mini-dunger [ Tue Feb 27, 2007 12:55 pm ] |
| Post subject: | syncros |
so just check and make sure they are not worn/broken, got it. Cheers |
|
| Author: | Wombat [ Tue Feb 27, 2007 1:46 pm ] |
| Post subject: | |
KC gives a couple of pointers in Mini Expert. Check of movement in the layshaft and sloppiness else where |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|