I'm running Alfetta GTV seats, they're comfortable but too bloody heavy. So I'm fitting a Cobra Trophy for me, and a POS Morris 850 one for whoever is hanging on..
| ausmini https://ausmini.com/forums/ |
|
| Seats in a mini https://ausmini.com/forums/viewtopic.php?f=5&t=253 |
Page 1 of 1 |
| Author: | skimini82 [ Wed Apr 07, 2004 8:38 am ] |
| Post subject: | Seats in a mini |
Hey all, Just wondering what sort of seats you guys have fitted into a mini. I was in my brothers VT commodore S the other day and it seems to have very short but hery supportive bucket seats. I haven't done any measurements but wondering if anyone else has had a go at trying to squeeze them in? I think if u removed the door pocket they could be a chance. will probably measure them next time i see him. Just wondering what other car seats you have fitted in or know of as fitting in.. i hear the 626 seats are a gem in the mini... |
|
| Author: | min13k [ Wed Apr 07, 2004 10:16 am ] |
| Post subject: | |
um from memery way to wide even with the door pockets out i think you would have problems applying the hand brake it is close with the 626 buckets makka |
|
| Author: | mini75 [ Wed Apr 07, 2004 11:35 am ] |
| Post subject: | |
i have some pulsar seats in my clubby, thats the imported pulsar GTI-R from japan. they are real comfee and hold me in place in tight corners. JIM |
|
| Author: | thommo09 [ Wed Apr 07, 2004 3:12 pm ] |
| Post subject: | |
i've always loved VT SS/HSV seats...VERY comfy and supportive too.....but i reckon they'd be WAY too wide to fit in a mini....you could try, but a set of decent SS seats wouldnt be any cheaper than aftermarket jobbies though would they? |
|
| Author: | boost_morrre [ Wed Apr 07, 2004 5:24 pm ] |
| Post subject: | |
i got a set of monza's in my clubby, just touch the doors and the handbrake lever is tight but free and i can stil get my hand in there, prob about 4-5 inch gap... |
|
| Author: | drmini in aust [ Wed Apr 07, 2004 7:17 pm ] |
| Post subject: | |
I'm running Alfetta GTV seats, they're comfortable but too bloody heavy. So I'm fitting a Cobra Trophy for me, and a POS Morris 850 one for whoever is hanging on..
|
|
| Author: | SSmini [ Wed Apr 07, 2004 7:27 pm ] |
| Post subject: | |
ive got the pulsar SS seats and there so comfy and they fit great there good as |
|
| Author: | ausminis4u [ Wed Apr 07, 2004 7:33 pm ] |
| Post subject: | |
SSmini wrote: ive got the pulsar SS seats and there so comfy and they fit great there good as i dont mean to sound like a smart ass but youre seats arent moke seats they are late model ls seats with the pulsar "S" embroided into then just lettin u know
|
|
| Author: | SSmini [ Wed Apr 07, 2004 7:41 pm ] |
| Post subject: | |
hahah thats kool i was told that they where pulsa seat's kool thnkas man but im gonna put grade anyway something for raceing seat belts |
|
| Author: | minitec [ Mon Apr 12, 2004 8:34 pm ] |
| Post subject: | |
yea, I was in a wreckers recently where you pull the parts yourself ( i love those places ). I was getting some stuff for my Rex and there was a Hyundai Excel (late model) next to me. I stuck my head in to look at the seats and I reckon they will fit perfect in a Mini. The floor pan of the Excel is exactly the same as a Mini. It has a raised section running from one side to the other, and this is where the front of the seats fasten to (same a Mini). So my theory is that they will bolt straight into a Mini! They don't look too wide either (like the Commo seats would definitley be) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|