Interesting Project thier Simon...keep use updated
| ausmini https://ausmini.com/forums/ |
|
| project scorpion https://ausmini.com/forums/viewtopic.php?f=5&t=2480 |
Page 1 of 2 |
| Author: | simon k [ Sun Oct 24, 2004 10:23 pm ] |
| Post subject: | project scorpion |
it's underway - feed your curiosity and have a look at my updated website |
|
| Author: | danidad [ Sun Oct 24, 2004 11:04 pm ] |
| Post subject: | |
we will be very interested on how the new project goes.. but the story of your Cooper is so sad it nearly bought a tear to my eyes. as it was we were only looking at it a few days ago and having a family discussion about how good it looked. the upside is that you came away reasonably unscathed. good luck to you and your family this time. |
|
| Author: | min13k [ Sun Oct 24, 2004 11:25 pm ] |
| Post subject: | |
sk man i have nothing to say but jeezus you must have smaked that dunnydore hard but as you say as luck would have it you are still alive walking and talking makka |
|
| Author: | gafmo [ Mon Oct 25, 2004 7:46 am ] |
| Post subject: | |
Interesting Project thier Simon...keep use updated
|
|
| Author: | J_A_M [ Mon Oct 25, 2004 8:38 am ] |
| Post subject: | |
Ouch...sorry to read about your 'S'. Go the mighty ugly boxy Civic....  I just sold one of those to a guy in Canberra!!
|
|
| Author: | simon k [ Thu Nov 04, 2004 8:34 pm ] |
| Post subject: | |
Minor update to the project scorpion work log on my site.... and this neat picture - let's see who spots what will be my biggest pain in the butt once this is finished 
|
|
| Author: | drmini in aust [ Thu Nov 04, 2004 8:42 pm ] |
| Post subject: | |
Oil filter is in a fun place, for starters. And the floor tunnel better be big to fit the tailshaft and the exhaust..
|
|
| Author: | thommo09 [ Thu Nov 04, 2004 8:53 pm ] |
| Post subject: | |
no joke....have fun changing the oil filter....... 
|
|
| Author: | simon k [ Thu Nov 04, 2004 9:00 pm ] |
| Post subject: | |
it's the oil filter - I'll have to do it from underneath with the exhaust undone, or take the carbs off or something..... the floor's gotta be widened a few inches, that's gonna be the hardest part of the build |
|
| Author: | Miniless [ Thu Nov 04, 2004 9:30 pm ] |
| Post subject: | |
Would it be possible to use a remote oil filter? |
|
| Author: | gafmo [ Thu Nov 04, 2004 11:23 pm ] |
| Post subject: | |
Other than the Exhaust and the tail shaft down the same tunnel and the oil filter..NICE fit into a Wet Front Subby..Whats above the Oil Filter (below the Carb I hope U have a BFH for that tunnel 
|
|
| Author: | drmini in aust [ Fri Nov 05, 2004 6:35 am ] |
| Post subject: | |
I think he'll need more than that- maybe a BF Plasma cutter... 
|
|
| Author: | simon k [ Fri Nov 05, 2004 8:18 am ] |
| Post subject: | |
gafmo wrote: Whats above the Oil Filter
it's a bracket for the standard honda air filter box - it's coming off just isn't in the way right now Doc, a BF Plasma cutter would be sweet, but I reckon my angle grinder will do the job - poor little GMC is about dead after cutting up the subframe though - I don't think the duty cycle covers demolishing 3 cutting wheels one after the other, only turning it off to change the disc... just need more practise on this little welder I've got. I'll prolly end up tacking it all up and getting one of my fabricator mates to do it properly |
|
| Author: | bnicho [ Fri Nov 05, 2004 12:38 pm ] |
| Post subject: | |
I have to ask.... What did you do with the GTi???
|
|
| Author: | 13secmini [ Fri Nov 05, 2004 12:57 pm ] |
| Post subject: | |
nice project, make sure you keep us all updated on it. are you going to be running the tailshaft and the exhaust through the cabin? |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|