| ausmini https://ausmini.com/forums/ |
|
| Recomendations: Rebuilding an 1100 in WA https://ausmini.com/forums/viewtopic.php?f=5&t=21833 |
Page 1 of 1 |
| Author: | Citric [ Thu Aug 24, 2006 4:08 pm ] |
| Post subject: | Recomendations: Rebuilding an 1100 in WA |
Hi Guys Can any recommend a good machinest to do the Crank, Block And/Or Head, in WA? Also where do you guys recommend buying a rebuild kit from, any ideas on price? What would be a good Cam to go for without changing the valve springs or rockers? Cheers Adam |
|
| Author: | awdmoke [ Thu Aug 24, 2006 5:52 pm ] |
| Post subject: | |
Where abouts in Perth, Adam? South - Al at Mini Central http://www.minicentral.com.au/ N.o.R. - Cono at Minicraft Never had any work done by Cono, but bought bits from there. Great reputation. Can personally recommend Al - knows his stuff & good rates 
Mike PS Next time you see MiniVan, remind him I'm still waiting for that carton! |
|
| Author: | Dave Elliott [ Fri Aug 25, 2006 2:47 pm ] |
| Post subject: | |
Machining: I use Harris Engines in Osborne Park. Probably used them for 10 engines in so many years (don't worry, different cars, different engines or modifications to). Ask for Mark and say Dave sent you. He knows his stuff and can also get the parts (pistons, rings, bearing etc.) at a reasonable price or you could supply your own (after having he check the sizes requierd. Then for parts I use Jack (or Cono) at MiniCraft, again always dealt with him and never had a problem. Cheers, Dave |
|
| Author: | miniVan [ Sat Aug 26, 2006 3:53 pm ] |
| Post subject: | |
haha.. i know i know mike!!!! adam actually is now my room mate we have a moke now too!!.. the 1100 is for the moke and will temporarily be going into his mini while his 1275 is in shipping and gets rebuilt.. we restoing the moke to its former glory for a few bucks i shall get down there with some beers one day.. i promise.. hehe.. i always think about it hey.. its just so faaaarrrrr and then i forget about it for a lil while.. hey you got any moke bits you dont want? just general crap like lil side panels etc.. our moke is complete.. just not very healthy.. much better than that bucket of junk we tore in half with the crane though.. ahhaha hows your project progressing? awdmoke wrote: Where abouts in Perth, Adam?
South - Al at Mini Central http://www.minicentral.com.au/ N.o.R. - Cono at Minicraft Never had any work done by Cono, but bought bits from there. Great reputation. Can personally recommend Al - knows his stuff & good rates Mike PS Next time you see MiniVan, remind him I'm still waiting for that carton! |
|
| Author: | Citric [ Wed Aug 30, 2006 4:12 pm ] |
| Post subject: | |
Cheers for the info guys. |
|
| Author: | GTi_Mini [ Mon Sep 04, 2006 4:50 pm ] |
| Post subject: | |
yeah Jack at Minicraft is an awesome source of info. and Cono pretty much knows minis insdie and out. if your in the perth area, then you cant go wrong with Minicraft. |
|
| Author: | GeoffP [ Wed Sep 06, 2006 11:55 pm ] |
| Post subject: | |
gday for the head - go to Al at Minicentral - excellent work excellent service you won't regret it. for the crank and block, Al sent me to Performance Modifications in Osborne Park ph 9446 8088. they did a good job too i miss my mini 
Geoff |
|
| Author: | AJ [ Thu Sep 07, 2006 7:01 pm ] |
| Post subject: | |
Take it to Al at Mini Central , he really knows his stuff , very good prices , and he doesn't try to charge you for every little thing , like some of the others do............. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|