ausmini
https://ausmini.com/forums/

850 Head
https://ausmini.com/forums/viewtopic.php?f=5&t=21035		 Page 1 of 1
Author:  sparkyboy [ Thu Aug 03, 2006 10:29 pm ]
Post subject:  850 Head
Probably a dumb question but can I replace a cactus 850 cylinder head with perhaps one from a larger engine? Any advantage in doing so? I know a lot of people will tell me to get a complete bigger engine but I would like to keep the original engine at least until I have completed the resto and got it registered. Still finding my way with this stuff so sorry if my questions are a bit dumb.

Good to see the old forums back. Look frward to getting to know everyone :) )


Dave
Author:  willy [ Thu Aug 03, 2006 10:38 pm ]
Post subject: 
If you are doing an original 850 resto, stick with an 850 head.
The car will be worth that little bit extra, in an "All Original" class at a Mini show, or the day you decide to sell it.
Keep it stocko, if doing an original resto.

Having said that, any head will fit, but with 1275 heads, pocketing of block for valve clearance *should* be done, for safety sake.
But a bigbore head on a bubby bore would be a bit much, maybe?
Author:  sparkyboy [ Thu Aug 03, 2006 10:43 pm ]
Post subject: 
Thanks for the advice willy. I'll keep my eye out for an 850 head. Don't need it urgentley as I'm still getting the body in order. Should stick to one thig at a time I know but I get a bit over excited I spose. So much to do - so much fun.

D
Author:  poeee [ Fri Aug 04, 2006 11:36 am ]
Post subject: 
An 1100 head will bolt straight on, it's the best standard head (other than the Cooper head, but they are like hens teeth). Also known as the 12G202.
Author:  sparkyboy [ Fri Aug 04, 2006 12:00 pm ]
Post subject: 
Thanks, I will put a message on the Wanted Forum and see what is around.

Dave
Author:  Lillee [ Fri Aug 04, 2006 12:03 pm ]
Post subject: 
I dunno I've seen a fair few 295's lately... looks like hen's teeth are pretty uncommon and not rare these days :lol:
Author:  sparkyboy [ Fri Aug 04, 2006 12:22 pm ]
Post subject: 
Availability of poultry dental work aside :) - any guide on what I should expect to pay? I realise a lot will depend on condition but was just after a range I spose.

D
Author:  pristic [ Fri Aug 04, 2006 1:35 pm ]
Post subject: 
Search ebay for 12g295 but They are about the $300 mark.
A 12g202 is anywhere from $50

Chong, its a cycle... they are still rare, but just changing hands at the moment :wink: lets just ensure they stay valuable ok... so go with the hens teeth :)

Peter
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/