<edit> 4/9/04 Price now reduced- $50 a pair, either 40 or 45mm size. Fits both Dellorto and Weber.

So far, I've had enquiries from for the following people:

40mm
Anto (2) sent
Spathi (2) sent
1310/71 (4) sent
Makka (2)
Supercharged 850 (2) sent

45mm
68delux (2)
Mike (2) sent via Gareth_1330
GeoffP (2) sent
Rupert (2) sent
Supercharged 850 (4) sent
Gafmo (2) sent

<EDIT 2> I got 14x 40's made, and 16x 45's, out of a 12" length of alloy bar.

Anyone asked me already I've missed, pm me (prefer), post to this thread, or email.

<EDIT> Updated numbers 23/9/04...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

uh... they'd also need to be posted to adelaide... but i'd be looking for 2 at 45mm....

_________________
[NATHAN] -- Sold everything mini related and am back in big beautiful BMWs

OK you're on the list.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

You can add me also Doc to the lit also. Then I just need to find a 45 Del

Cheers

_________________
Stop Licking the Dog...I Don't Care Who Started It

Yep, done..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

OK, as I'm doing a whole bunch of these the price is reduced.
Now $50 a pair...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

at that price i'll take 4 instead of 2 (45mm)

_________________
[NATHAN] -- Sold everything mini related and am back in big beautiful BMWs

OK.

Progress:
I've made 6 of the 40's so far, 1310/71 got his (4) today. I'm finishing the 40's off first then I'll do the 45's.
Should all be made by next Sunday (maybe).

I'll PM each of you when yours are finished, so you can then give me your address and arrange to send some $$.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Kev, just keep mine until we fit the dellorto Cheers

_________________
Lillee - 1969 Morris Mini K

hmmmm should i get a pair made for my dello
or wait
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

I'll make a couple of spares until you make up yer mind..
(he used to be indecisive- now he's not sure...)

<edit> I've made 40's- if you change it to a 45 later I'll just bore 'em out and redo the radius.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

OK, customers,
As I said, the price is $50/pair for either 40 or 45mm sizes.

Postage costs-
Mail to anywhere in Oz (for 2) will be $3.40.
I've bought some `jiffy bags' so they don't get damaged by OzPost.
So make it $5 total for pack and post.

I don't have PayPal (long story.. ) so easiest for me is- just send me a $55 mail order, for 2 stubstacks. (or post me $55 in notes if you'd rather)

Those who wanted 4 stubstacks, send me a $105 mail order and I'll wear the extra postage if any.

Anybody in Sydney who would rather, can come pick 'em up instead.

I'll advise y'all by PM when they're ready to ship, and give you my address.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Bloody legend!!

I'll send ya $110 anyway

_________________
[NATHAN] -- Sold everything mini related and am back in big beautiful BMWs

OK the 40s are now all made, and I'm starting on the 45s tomorrow.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Doc,

I fitted mine on tonight - straight on, no problems. They look the business too!

Haven't driven the car yet, will let you know how it goes.

BTW, you asked what air filter I'm running - I'm just using the Lynx Ramflo one that came with the kit.

Now I've got to organise to get around to the suppliers for my redline manifold and Maniflow LCB. Even though it's secret men's business, I might have to ask my wife to pick them up - curse Hardiman's and Karcraft for not opening Saturdays!

Many Thanks
Kevin.