Oh never mind, AEG177 are infact MK.I S rods. Anyone got a spare?! Will swap for AEG521... See post in wanted... which is exactly the same.
| ausmini https://ausmini.com/forums/ |
|
| S rods vs. Non-S rods https://ausmini.com/forums/viewtopic.php?f=5&t=20676 |
Page 1 of 1 |
| Author: | kartbro [ Fri Jun 30, 2006 3:03 pm ] |
| Post subject: | S rods vs. Non-S rods |
Hey guys, can someone tell me if non-s rods are going to be strong enough in my stroker build? Lookin at 120hp maximum. Do i really need to source the S rods, or can i get the others balanced and lightened etc? |
|
| Author: | kartbro [ Fri Jun 30, 2006 3:26 pm ] |
| Post subject: | |
Oh never mind, AEG177 are infact MK.I S rods. Anyone got a spare?! Will swap for AEG521... See post in wanted... which is exactly the same.
|
|
| Author: | drmini in aust [ Fri Jun 30, 2006 8:35 pm ] |
| Post subject: | |
Just check they are all the same weight if you have to mix them. 
|
|
| Author: | TheMiniMan [ Sat Jul 01, 2006 11:57 am ] |
| Post subject: | |
Kartbro,,,if you have a set of 521s then use them, they`re stronger than the 177s |
|
| Author: | Smiffy [ Sat Jul 01, 2006 10:37 pm ] |
| Post subject: | |
Isn't there a problem with 521's and the camshaft in a stroked motor. Which is why 177's are needed. |
|
| Author: | drmini in aust [ Sun Jul 02, 2006 8:56 am ] |
| Post subject: | |
Most strokers here in Oz I've seen were done using 521s- are you sure it's not the 8 port Arden head (with its funny cam lobe assignments) that causes the prob when stroked? maybe.... 
|
|
| Author: | TheMiniMan [ Sun Jul 02, 2006 7:24 pm ] |
| Post subject: | |
Smiffy,,,i`ve been doin strokers for over 20 years,,,allways use 521s my 1510cc stroker donk has crank offset ground to .080thou undersize & has 521 rods, that`s quite a big stroke --->(but that`s just what all the girls tell me  )
|
|
| Author: | marcsvenson [ Sun Jul 02, 2006 7:27 pm ] |
| Post subject: | |
yeah yeah 
|
|
| Author: | marcsvenson [ Sun Jul 02, 2006 7:39 pm ] |
| Post subject: | |
| refers to the stroker donks that he builds which are quick
and to the girls comment 
|
|
| Author: | Zizzle [ Sun Jul 02, 2006 8:10 pm ] |
| Post subject: | |
TheMiniMan wrote: .080thou undersize & has 521 rods, that`s quite a big stroke --->(but that`s just what all the girls tell me
)You measure your stroke in thousanths of an inch? Strange girls is all I can say 
|
|
| Author: | Smiffy [ Sun Jul 02, 2006 8:57 pm ] |
| Post subject: | |
Come on guys it was a question, one which im quite pleased about your answers, as I do have a set of 521's in storage for a rainy day. |
|
| Author: | TheMiniMan [ Wed Jul 05, 2006 10:55 pm ] |
| Post subject: | |
Now zizzle,,,you`ve gone & rained all over my parade
yeah, use the 521s Smiffy, no problemo. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|