Ausmini
It is currently Fri Jul 04, 2025 10:09 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Clutch backing plate?
PostPosted: Thu May 11, 2006 12:09 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
I am about machine the clutch backing plate as it has a few grooves in it. What is the minium safe thickness that I can go?
Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 14, 2006 10:53 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
Take no more off the drive face than needed to clean up, and then take that same amount also from the 3 lugs or you will reduce clutch pressure.
If you want to lighten it a bit you can put a groove in the rear face 5mm deep, but don't make it more than 1/2 the width of the plate... and keep it centred.
Don't just face heaps off the back of it, that weakens it and makes it bendy or breaky... (it's cast iron, not steel).

It will need rebalancing with the flywheel when done.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 15, 2006 9:44 am 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
When you rebalance them do you have it all together with cluch plate and diaghram, or just the flywheel and backing plate?
Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 15, 2006 10:38 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
You take the flywheel, backplate and diaphragm, with straps & bolts.
Clutch plate not needed.
They balance the flywheel, then add the backplate, then add the diaphragm.
Make sure they paint mark it when finished.... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 15, 2006 11:30 am 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
Thanks heaps for the info.
Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.