| ausmini https://ausmini.com/forums/ |
|
| Su carb piston springs https://ausmini.com/forums/viewtopic.php?f=5&t=18363 |
Page 1 of 1 |
| Author: | nem0_5 [ Thu Apr 20, 2006 7:18 pm ] |
| Post subject: | Su carb piston springs |
Hello all I have just installed cooper s disc brakes a booster, cooper s extractors and a minispares inlet manifold with 1"1/2 su to my car over the long weekend. the problem i am having now is that the air filter i am using is sucking too much air and it's opening the piston prematurely. thus i am looking for someone to supply me with a double spring set, or a stronger spring for my carby. even some advice on where to get one would be great. |
|
| Author: | 9YaTaH [ Thu Apr 20, 2006 7:19 pm ] |
| Post subject: | Re: Su carb piston springs |
nem0_5 wrote: Hello all
I have just installed cooper s disc brakes a booster, cooper s extractors and a minispares inlet manifold with 1"1/2 su to my car over the long weekend. the problem i am having now is that the air filter i am using is sucking too much air and it's opening the piston prematurely. thus i am looking for someone to supply me with a double spring set, or a stronger spring for my carby. even some advice on where to get one would be great. No offence Profile needs update where are you??? Ohhhh....... try a thicker oil in the dash pot.... |
|
| Author: | simon k [ Fri Apr 21, 2006 6:00 pm ] |
| Post subject: | |
your air filter isn't sucking more air, it's your motor saying "thank god I can finally breathe properly" and sucking more air... you'll probably find the mixture is very lean now too and what he said ^^^ thicker oil in the dashpot |
|
| Author: | poeee [ Fri Apr 21, 2006 10:17 pm ] |
| Post subject: | |
Usually with upgrades even as minute as a change from a standard air filter to a sports one, it can muck up the mixture. Sounds like you may need a different needle. |
|
| Author: | gafmo [ Sat Apr 22, 2006 12:08 am ] |
| Post subject: | |
Yep...Yep.and yep,,,total agree on all the above Once you change your airfilter, Exhaust, inlet Manfold or carb if you want the perfect tune you will need a Dyno Tune..as Mention by Mike..fill in your Details and we maybe able to direct you to a good place to go to with a Air fuel mixture and knows Mini's then you you will be able to adujst it with needle's or the the state of tune your need 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|